| |
Model A7200 - Insulated Pipe Support - Heavy Duty with Load Bearing Plate |
< Back to Commerical & Light Industrial Types
Oper. Temp°F |
Mult. Factor "F" |
500
750
1000
1200 |
.90
.75
.50
.30 |
Table II |
Hardware Sold Separately - Note: For higher load ratings, see A7400, B1100. The load ratings represent average values obtained in accordance with accepted methods and are subject to normal manufacturing variations. Dimensions and ratings are subject to change without notice.
To develop maximum load rating, width of support surface should be at least 1/2 of dimension "B" in Table I.
|
Pipe Size |
Maximum Load Rating (lb.) |
A |
B |
C |
On Flat Surface (a) |
| |
1000
1250
1550 |
9
9
9 |
6
6
6 |
1/2
1/2
5/8 |
12
14
16 |
2250
2780
3300 |
9
9
9 |
6
6
6 |
5/8
5/8
3/4 |
18
20
24
|
3600
3800
4100
|
9
9
9 |
6
6
6 |
3/4
3/4
1
|
30
36
42 |
4500
4500
4500 |
9
9
9 |
6
6
6 |
1
1
1 |
TABLE I |
|
Application:
Model A7200 is designed for use on:
- Cold Water
- Hot Water
- Chilled Water
- Dual Temperature
- Vacuum
- Steam
- Gas
- Air
Intended for Installation on:
- Flat Surfaces
- Pipe Rolls, see A8200
- Clevis Hangers, see A9000
Temperature Range: +40°F to +1200°F
Note: Up to 1700°F available upon request. |
Features
- Compact
- Easy Installation
- Eliminates welding to pipe
- Overlapping galvanized sheet metal jacket
- Insulating structural inserts for load transfer
- Minimizes heat loss and/or condensation
- Load distribution plate integral with bottom jacket
- Copper tubing sizes available
- Other I.D.'s and/or O.D.'s available on request
Performance Test Results on File: Available upon request. |
Material Data:
- A7200: Applicable PSI spec. doc.: No. 205
- Insulation: Calcium Silicate asbestos-free, treated with water repellant.
- Jackets: Galvanized Steel ASTMA-527
- Load Distribution Plate: Carbon Steel ASTM A-36
- Coating: Primer coated or hot-dip galvanized
- Glue: Industrial contact adhesive
Formal Submittal Sheets Available |
|
| |
|
|
