| |
Model A8200 - Insulated Pipe Support - Heavy Duty with Load Bearing Plate |
< Back to Commerical & Light Industrial Types
Hardware Sold Separately - Note: For higher load ratings, see A8400, B1100. The load ratings represent average values obtained in accordance with accepted methods and are subject to normal manufacturing variations. Dimensions and ratings are subject to change without notice. |
Pipe Size |
Maximum Load Rating (lb.) |
A |
B |
C |
Max. Axial Travel (inches) on Pipe Roll +/- |
On Pipe Roll |
|
900
1125
1375 |
12
12
12 |
9
9
9 |
1/2
1/2
5/8 |
3
3
3 |
12
14
16 |
2550
2650
2950 |
12
12
12 |
9
9
9 |
5/8
5/8
3/4 |
3
3
3 |
18
20
24
|
3200
3375
3675
|
12
12
12 |
9
9
9 |
3/4
3/4
1
|
3
3
3 |
30
36
42 |
4050
4050
4050 |
12
12
12 |
9
9
9 |
1
1
1 |
3
3
3 |
TABLE I
|
|
Application:
Model A8200 is designed for use on:
- Cold Water
- Hot Water
- Chilled Water
- Dual Temperature
- Vacuum
- Steam
- Gas
- Air
Intended for Installation on:
- Flat Surfaces
- Pipe Rolls, see A7200
- Clevis Hangers, see A9000
Temperature Range: +40°F to +1200°F
Note: Up to 1700°F available upon request. |
Features
- Compact
- Easy Installation
- Eliminates welding to pipe
- Overlapping galvanized sheet metal jacket
- Insulating structural inserts for load transfer
- Minimizes heat loss and/or condensation
- Load distribution plate integral with bottom jacket
- Copper tubing sizes available
- Other I.D.'s and/or O.D.'s available on request
Performance Test Results on File: Available upon request. |
Material Data:
- A8200: Applicable PSI spec. doc.: No. 205
- Insulation: Calcium Silicate asbestos-free, treated with water repellant.
- Jackets: Galvanized Steel ASTMA-527
- Structural Inserts: High-density calcium silicate asbestos-free, treated with water repellant.
- Load Distribution Plate: Carbon Steel ASTM A-36
- Coating: Primer coated or hot-dip galvanized. Other coatings available upon request.
- Glue: Industrial contact adhesive
Formal Submittal Sheets Available |
|
| |
|
|
