| |
< Back to Insulated Riser Clamps
Model E2300 - Insulated Pipe Riser Clamps for Upward or Downward Loads |
|
a. If thrust plate thickness "B" is greater than pipe wall thickness, consult factory.
b. One pair thrust plates supplied loose for field welding, top only.
Installation Instructions
Iron Pipe Size |
load lb.
|
A |
B |
C |
D |
E |
Insul Thk. = 1" |
Insul Thk. = 2" |
Insul Thk. = 3" |
Insul Thk. = 4" |
F |
G |
H |
F |
G |
H |
F |
G |
H |
F |
G |
H |
12
14
16
|
6800
8000
9200
|
1.13
1.13
1.13
|
0.50
0.50
0.63
|
0.50 x 7.00
0.50 x 7.00
0.63 x 7.00
|
5.00
5.00
5.00
|
0.875
0.875
1.00
|
9.69
10.19
11.44
|
11.94
12.44
13.69
|
16.13
17.13
19.38
|
10.69
11.19
12.44
|
12.94
13.44
14.69
|
18.13
19.13
21.38
|
11.69
12.19
13.44
|
13.94
14.44
15.69
|
20.13
21.13
23.38
|
12.69
13.19
14.44
|
14.94
15.44
16.69
|
22.13
23.13
25.38
|
18
20
24
|
10000
10800
11200
|
1.13
1.13
1.13
|
0.63
0.63
0.63
|
0.63 x 7.00
0.63 x 7.00
0.63 x 7.00
|
5.00
5.00
5.00
|
1.00
1.00
1.25 |
12.44
13.44
15.69 |
14.69
15.69
18.19 |
21.38
23.38
27.38
|
13.44
14.44
16.69
|
15.69
16.69
19.19
|
23.38
25.38
29.38
|
14.44
15.44
17.69
|
16.69
17.69
20.19
|
25.38
27.38
31.38
|
15.44
16.44
18.69
|
17.69
18.69
21.19
|
27.38
29.38
33.38
|
|
|
Application:
Model E2300 through E2330 are designed for use on:
- Cold Water
- Hot Water
- Chilled Water
- Dual Temperature
- Steam
- Air
- Gas
- Vacuum
Intended for installation on:
- vertical runs of insulated pipe with upward and/or downward load.
Other:
- For handling downward loads only, see E1300.
Temperature Range: +40°F to +1200°F |
Features
- All pipe sizes
- Easy Installation
- Positive stop - axially downward.
- May be supported from below or above.
- Overlapping galvanized sheet metal jacket
- Insulating structural inserts for load transfer
- Other I.D.'s and/or O.D.'s available on request
- Eliminates condensation sweating on chilled water risers
Performance Test Results on File: Available upon request. |
Material Data:
- E2300 - E2330 : Applicable PSI spec. doc.: No. 206
- Steel Top Thrust Plates
- Model E2300: A25 Carbon-Steel
- Model E2310: A387 Gr.11 Chrome-Moly
- Model E2320: A515 Gr.70 Carbon Silicon
- Model E2330: A304L Stainless Steel
- Insulation: Calcium Silicate - Asbestos-free, treated with a water repellant.
- Jackets: Galvanized Steel ASTM-527
- Glue: Industrial contact adhesive
- Structural Inserts: High-density calcium silicate asbestos-free, treated with water repellant.
- Steel Straps: Carbon Steel ASTM A-36
- Fasteners: ASTM A-307 Plated
- Coating: Primer coated or hot dipped galvanized. Other coatings available upon request.
Formal Submittal Sheets Available |
| |
|
|
|
| |
|
|
