Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
April — 2001 — The Pipe Supports Blog
Archive for April, 2001

Pig Launchers and Receivers for Separation Project

April 22nd, 2001 No comments

 

Pig Launchers and Receivers for Separation Project

Pig Launchers and Receivers for Separation Project

SWECO Fab, Inc. manufactured eight 8″ and four 10″ pig launchers and receivers for a separation project off the West Coast of Africa. The products were immediately put to use for placement and removal of pigs. These launchers and receivers were designed with quick opening doors and R.T.J flanges at 2300 psig, built to ASME, Sect. VIII, Div. 1 and D.N.V. inspected.

Want to learn more about pig launchers and receivers? Visit our webinar archives today!


access-our-webinar-archives



Replacement of a Constant Spring Hanger

April 11th, 2001 No comments
Replacement of a Constant Spring Hanger

Replacement of a Constant Spring Hanger

A large refinery plant located in Pasadena, TX called upon Piping Technology & Products, Inc. to aid them in the immediate replacement of a 5400 Lbs, 7 1/2″ travel vertical constant spring hanger used to support a Coker drum.

The constant spring hanger was damaged during servicing. The reliability engineer from the refinery contacted PT&P Wednesday evening to request an inspection by a PT&P field services representative. The following morning PT&P’s field services representative arrived on-site, inspected the damaged constant spring hanger and suggested that a replacement would be most efficient and cost effective. With the existing nameplate bolted to the constant, PT&P was able to easily locate the original design of the constant.

The original design, along with the convenience of the component parts being in stock inventory, allowed PT&P to quickly manufacture a replica of the constant and ship it out on the same day by 6 p.m.

In the past, lead times for delivery of constant supports averaged 6-8 weeks, however, through the process of maintaining stock components of interchangeable parts, lead time has been drastically reduced. Piping Technology & Products, Inc. maintains a large inventory of stocked constant support assembly components that allows them to quickly assemble and ship to customers on demand, especially in emergency/quick-turn situations.

April 2001 News

April 10th, 2001 No comments

PT&P Manufactures Custom Designed Embed Plates for Gold Mine in Cajamarca, Peru
Piping Technology & Products, Inc., designed and manufactured 150 special embed plate pieces for Latin America’s largest gold producer. This project involved the production of one hundred fifty, 93″ x 27″ x 1″ embed plates which required the use of 80,000 pounds of steel and anchors. The custom designed, carbon steel, embed plates are to provide stability for the feed openings of four mineshaft reclaim tunnels and are scheduled to be put to use immediately.

Custom Embed Plates for Gold Mine in Cajamarca, Peru

Custom Embed Plates for Gold Mine in Cajamarca, Peru

How to Avoid Pipe Stress
What is Pipe Stress?
“Pipe Stress” refers to piping flexibility analysis.

High Stress Locations on Pipes
High stress areas generally occur at piping elbows, tees and other branch connections. The B 31.3 Piping Code provides stress intensification factors for such locations. Computer piping programs generally do piping flexibility analysis for those other than very simple systems.

Signs of Pipe Stress
An overstressed system could fail by fatigue, leading to a crack, buckling of the elbows, or overload on equipment nozzles.

How to Reduce Pipe Stress
High stress should be uncovered in the design stage. However, existing systems can be checked for incipient cracks by x-ray, ultrasound, acoustic emission or dye penetrant. Also, rerouting the pipe can provide more flexibility and sometimes reduce high stress. When rerouting is impossible or not practical, then pipe stress can be reduced significantly by adding Bellows Expansion Joints. Any sections of the pipe showing cracks must be replaced.

Product of the Month

Transition Piece

Transition Piece

Transition Piece

Transition Piece

(at left)47.25″ I.D. x 23.625″ I.D. 5A516-70 Transition Pieces w/ 5A36 stiffner for ethylene plant in Saudia Arabia. (at right)47.25″ I.D. Universal Expansion Joint w/ SB443 round corners bellows, and SA516-70 flanges for ethylene plant in Saudia Arabia.

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy