Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
April 2001 News — The Pipe Supports Blog

April 2001 News

April 10th, 2001

PT&P Manufactures Custom Designed Embed Plates for Gold Mine in Cajamarca, Peru
Piping Technology & Products, Inc., designed and manufactured 150 special embed plate pieces for Latin America’s largest gold producer. This project involved the production of one hundred fifty, 93″ x 27″ x 1″ embed plates which required the use of 80,000 pounds of steel and anchors. The custom designed, carbon steel, embed plates are to provide stability for the feed openings of four mineshaft reclaim tunnels and are scheduled to be put to use immediately.

Custom Embed Plates for Gold Mine in Cajamarca, Peru

Custom Embed Plates for Gold Mine in Cajamarca, Peru

How to Avoid Pipe Stress
What is Pipe Stress?
“Pipe Stress” refers to piping flexibility analysis.

High Stress Locations on Pipes
High stress areas generally occur at piping elbows, tees and other branch connections. The B 31.3 Piping Code provides stress intensification factors for such locations. Computer piping programs generally do piping flexibility analysis for those other than very simple systems.

Signs of Pipe Stress
An overstressed system could fail by fatigue, leading to a crack, buckling of the elbows, or overload on equipment nozzles.

How to Reduce Pipe Stress
High stress should be uncovered in the design stage. However, existing systems can be checked for incipient cracks by x-ray, ultrasound, acoustic emission or dye penetrant. Also, rerouting the pipe can provide more flexibility and sometimes reduce high stress. When rerouting is impossible or not practical, then pipe stress can be reduced significantly by adding Bellows Expansion Joints. Any sections of the pipe showing cracks must be replaced.

Product of the Month

Transition Piece

Transition Piece

Transition Piece

Transition Piece

(at left)47.25″ I.D. x 23.625″ I.D. 5A516-70 Transition Pieces w/ 5A36 stiffner for ethylene plant in Saudia Arabia. (at right)47.25″ I.D. Universal Expansion Joint w/ SB443 round corners bellows, and SA516-70 flanges for ethylene plant in Saudia Arabia.

Comments are closed.

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy