Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
February — 2002 — The Pipe Supports Blog
Archive for February, 2002

Chrome-Moly Shoe for an 18" Pipe

February 22nd, 2002 No comments
Chrome-Moly Shoe for an 18" Pipe

Chrome-Moly Shoe for an 18" Pipe

Piping Technology & Products, Inc., designed and fabricated a Figure 700 chrome-moly shoe for an 18″ pipe used to support high temperature lines at a power plant in Mexicali, Mexico.

The shoe’s length is 12″ and the pipe centerline distance was maintained at 17 3/8″ from the bottom of the shoe. The clamp was designed at 1065°F and the load was designed for 6965 pounds. The base and clamp plates are made of A387 GR.22 plate material and the u-bolt parts are made of A193 GR.B7 bar stock.

Want to learn more about chrome-moly shoes and other products from Piping Technology and Products? Visit our webinar archives today!



access-our-webinar-archives



400 Lightweight, Vertical Constant Load Hangers

February 15th, 2002 No comments
400 Lightweight, Vertical Constant Load Hangers

400 Lightweight, Vertical Constant Load Hangers

400 Lightweight, Vertical Constant Load Hangers

Constants in the Field

Piping Technology & Products, Inc. specially designed and fabricated four hundred 100-C, vertical constant load hangers for a plastics plant in Texas. The constants will be used to support a furnace standing three levels high.

In the plant, thirteen single beams confined to limited space will each hang thirty constants, therefore PT&P engineers were required to design the constants to weigh less than 150 pounds. The 136-pound constants with travels of 10 inches upward and a supporting load of 950 pounds, are 33 7/8″ in height and 8 7/8″ in width. They are also supplied with shop prime, painted finish to safeguard against the extremely hot temperatures of the furnace area. In order to insure quality and proper operations of the constants, a prototype was built and tested to MSS standards.

Need some vertical constant load hangers? Let us price one for you today!

request-a-quote


66" Diameter, Three-bolt Pipe Clamp

February 8th, 2002 No comments
66" Diameter, Three-bolt Pipe Clamp

66" Diameter, Three-bolt Pipe Clamp

66" Diameter, Three-bolt Pipe Clamp

66" Diameter, Three-bolt Pipe Clamp

Piping Technology & Products, Inc. custom designed and fabricated a 66-inch diameter, three-bolt pipe clamp for a chemical company located in Deer Park, Texas.

The clamp will be used in conjunction with a PT&P Spring Hanger and a length of rod in order to support the pipeline.  After formation, the clamp’s dimensions measured at 97.75 OAL and 69.5 at its widest point. By using a FEA program, the clamp was designed for an operating load of 24,000 pounds at 500° F. The materials used consisted of 1 ¾ x 10 x 128 ¼ thick A-36 Carbon steel, with three 2½ studs and nuts.

In need of some three-bolt pipe clamps? Request for pricing today!

request-a-quote


Stainless Steel Stanchions for a Power Company

February 1st, 2002 No comments
Stainless Steel Stanchions for a Power Company

Stainless Steel Stanchions for a Power Company

Piping Technology & Products, Inc. provided 35 stainless steel stanchions for pipe sizes 4 to 18 inches for a power company in Alabama.

The ends of the stanchions have shop-cut end connections that will allow field welding without any modifications by site personnel. Some stanchions were provided with straight pipe connections and others were provided with elbow connections. The minimum height requirement provided for a centerline height equal to approximately 16″ while the maximum pipe centerline was required to be at approximately 58 ½”. The stanchions were designed at 1100°F and sustained a maximum design load of 18,000 pounds. The stanchion base plates are 304 stainless steel and the tubes are constructed of A240 GR.304 seamless pipe.

Do you need stanchions for your company? Request a quote and get a response within 48 hours!

request-a-quote


Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy