Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
October — 2002 — The Pipe Supports Blog
Archive for October, 2002

Hydraulic Snubbers for a Construction Site

October 25th, 2002 No comments
Hydraulic Snubbers for a Construction Site

Hydraulic Snubbers for a Construction Site

Piping Technology & Products recently designed and manufactured three hydraulic snubbers for a construction site in Louisiana.

These snubbers, with an operating load of 3500 lbs., are 2.5 x 6 and allow for 4 of total travel distance. The lock-up velocity test was performed on these snubbers to make sure that at high rates of loading, especially impact, the snubber would provide very high resistance to movement. And, the drag test was performed to make sure that at low speeds they provide very low resistance to movement.

Do you see a need for hydraulic snubbers in your plant? Let us price them for you today!

request-a-quote


Stanchions and Beams for a Power Center

October 18th, 2002 No comments
Stanchions and Beams for a Power Center

Stanchions and Beams for a Power Center

Piping Technology & Products, Inc. designed and manufactured carbon steel and alloy stanchions for a power center in Arizona.  PT&P also produced carbon steel beams for the project.

These stanchions are made to fit Extra Strong and Standard pipes, which are 3-12 in size. Figure 1 shows the stanchions and beams for this job before they were coated with a green primer and prepared for shipment.

Do you see a need for stanchions and beams in your power plant or refinery? Get pricing today!

request-a-quote


Various Sized Cold Shoes for a Chemical Plant

October 11th, 2002 No comments
Various Sized Cold Shoes for a Chemical Plant

Various Sized Cold Shoes for a Chemical Plant

Piping Technology & Products, Inc. designed and manufactured 250 variable sized cold shoes for a chemical plant in Texas.

These cold shoes are designed for cryogenic (low temperature) pipelines where direct contact with the pipe cannot be made.  These shoes come with two pieces, top and bottom, and are made of polyurethane foam.  They are then wrapped in vapor barriers, covered with a protective shield and placed in a pipe saddle.

Want to learn more about cold shoes? View a pre-insulated pipe support webinar today!


access-our-webinar-archives



Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy