Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
1,520 Spring Assemblies for a Chemical Plant — The Pipe Supports Blog
Home > Engineered Spring Supports > 1,520 Spring Assemblies for a Chemical Plant

1,520 Spring Assemblies for a Chemical Plant


1,520 Spring Assemblies for a Chemical Plant

1,520 Spring Assemblies for a Chemical Plant

PT&P recently manufactured 1,520 PTP-2 and PTP-4 spring hanger assemblies designed specifically for a furnace application. These custom variable springs have welded components as opposed to bolted components found in standard assemblies. Due to the space limitation within the furnace, the spring coils were set in a welded housing which allows for the springs to be closely oriented within a smaller spatial envelope. The pipe hanger assemblies are made from carbon steel, consisting of variable spring, rod, and riser clamp components. Instead of galvanizing, the assemblies were coated with a red-oxide primer due to the high temperature operating conditions of the furnace. This prevents the possibility of molten zinc (from the galvanizing process) contaminating the furnace tubes.

1,520 Spring Assemblies for a Chemical Plant

1,520 Spring Assemblies for a Chemical Plant

The springs are designed for loads of 143 to 660 lbs. and for total travel ranging from 3/4 to 2″. Each assembly was pre-assembled to ensure free movement throughout the spring’s travel range before welding the bottom closure plate. Prior to shipment, all assemblies were calibrated to determine the exact spring rate and then were set to the customer’s designated cold load position. These springs are then located and installed into the furnace based on the spring rate.

Do you see a need for spring assemblies in your piping system? Get a quote today!

request-a-quote


  1. No comments yet.
  1. No trackbacks yet.
You must be logged in to post a comment.

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy