Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
December — 2003 — The Pipe Supports Blog
Archive for December, 2003

Two Hundred HD-2 Hold Down Clamps

December 26th, 2003 No comments
Two Hundred HD-2 Hold Down Clamps

Two Hundred HD-2 Hold Down Clamps

PT&P designed and manufactured two hundred and thirty HD-2 hold down clamps to fit 6” to 8” pipes at a chemical refinery. These hold down clamps are used on pipe lines where there is a high temperature and great thermal movement requirements, they allow axial movement and restrain lateral movement at the same time. The clamps are fabricated from carbon steel with 3/32” PTFE, 25% glass filled, bonded to the radius. The plates are manufactured from three layers of materials; 3/32” PTFE, 25% glass filled, 1/2” thick fabric belting material and carbon steel.

Want to learn more about hold down clamps? View a past pipe clamp webinar now!


access-our-webinar-archives



9200 lb. Load Type “E” Constant Hanger Assemblies

December 12th, 2003 No comments
9200 lb. Load Type “E” Constant Hanger Assemblies

9200 lb. Load Type “E” Constant Hanger Assemblies

PT&P designed and manufactured forty PTP 200- type “E” constant hanger assemblies with pipe sizes ranging from 36” to 62” for an oil refinery in Canada.  These constant hanger assemblies are designed to support and allow vertical movement of the field pipe during thermal expansion. The constants have a load capacity of 2800 lbs. to 9200 lbs. and a 3”-7” travel range. To assure quality, standard load testing was performed on the constants prior to shipping. The assemblies’ components consist of a constant load hanger, a rod and a clamp. The constants are fabricated from ASTM A36 carbon steel and the rod and clamp were manufactured from ASTM A240, Gr. 304 stainless steel.

Want to learn more about constant hangers? View a past constant webinar today!



access-our-webinar-archives



Two 240" x 12" x 1/2" Embed Plates for a Concrete Reinforcement Application

December 5th, 2003 No comments

Two 240" x 12" x 1/2" Embed Plates for a Concrete Reinforcement Application

Two 240" x 12" x 1/2" Embed Plates for a Concrete Reinforcement Application

Two 240" x 12" x 1/2" Embed Plates for a Concrete Reinforcement Application

Two 240" x 12" x 1/2" Embed Plates for a Concrete Reinforcement Application

PT&P designed and manufactured two 240″ x 12″ x 1/2″ Embed Plates with 3/4″ diameter weld-stud projections to be used in a concrete reinforcement application.  All components are fabricated out of carbon steel with a hot-dipped galvanized finish. The plates were shaped to form a 45″ x 90″ frame prior to shipment. The frames were braced with 2″ x 2″ x 1/4″ angles to ensure the frame maintained its structural shape prior to installation.

Do you require embed plates like those described above? Get pricing today!
request-a-quote


72” Roller Stands for a Cooling Tower

December 3rd, 2003 No comments
72” Roller Stands for a Cooling Tower

72” Roller Stands for a Cooling Tower

PT&P fabricated heavy-duty roller stands, 60” and 72” in diameter, to support large pipes in a cooling tower. The roller stands support loads up to 60,000 lbs. while allowing the pipe axial movement during temperature fluctuation. To reduce friction the rollers are fabricated out of machined carbon steel. The round bar and the stands are fabricated from A-36 carbon steel plate.

Do you require roller stands in your piping system? Let us price them for you today!
request-a-quote


Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy