Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
April — 2004 — The Pipe Supports Blog
Archive for April, 2004

240 Welded Eye Rods for an Ammonia Plant

April 30th, 2004 No comments
240 Welded Eye Rods for an Ammonia Plant

240 Welded Eye Rods for an Ammonia Plant

Piping Technology and Products, Inc. designed and manufactured 240 PT&P Figure 110 welded eye rods for an ammonia plant in Saudi Arabia. The rods will be attached to Type A variable springs designed to support loads from 850 lb. to 13,300 lb. Manufactured from A-36 carbon steel, the rods are 3/4 to 2 in diameter and range in length from 68 to 95. To prevent contamination at high temperatures, a red oxide primer with an alkyd topcoat was applied to the rods as per the customer’s request. Prior to shipment, a 100% dye-penetrant test was performed to ensure quality.

Do you have a requirement for welded eye rods in your current job? Get pricing now!
request-a-quote


Two 16 Dia. HD-2 Hold Down Clamps for an Oil Refinery

April 16th, 2004 No comments
Two 16 Dia. HD-2 Hold Down Clamps for an Oil Refinery

Two 16 Dia. HD-2 Hold Down Clamps for an Oil Refinery

Piping Technology and Products, Inc. recently designed and manufactured two HD-2 hold down clamps to fit a 16 pipe at an oil refinery in Michigan.  These hold down clamps are designed to be used on pipe lines where there is a high temperature and great thermal movement requirements. They allow axial movement while restraining lateral movement. The clamp and base plate are fabricated from carbon steel with PTFE, 25% glass filled, bonded to the radius and plate.

Do you see a need for hold down clamps in your piping system? Get pricing today!
request-a-quote


90,000 lb. Load Big Ton Springs for a Chemical Plant

April 9th, 2004 No comments

90,000 lb. Load Big Ton Springs for a Chemical Plant

90,000 lb. Load Big Ton Springs for a Chemical Plant

90,000 lb. Load Big Ton Springs for a Chemical Plant

Name Plate Indicates Hot/Cold Loads

Piping Technology and Products, Inc. manufactured four 13,500 lb. Big Tons Springs for a chemical plant in Texas. These PTP-500 Big Ton Springs have a load capacity of 60,000 to 90,000 lb. are fabricated from A-36 carbon steel. They are designed for 750°F and a downward travel range of 3/16″ to 1/4″. These 37″ x 31″ x 30″ Big Tons will be used to support certain critical equipment with thermal expansion at the chemical plant. To assure quality, load testing was performed on the big tons prior to shipping.

Do you require big ton springs in your current or future job? Get pricing today!
request-a-quote


April 2004 News

April 4th, 2004 No comments

Updated Version of PHDS Download
Pipe Hanger Design Software (PHDS) is an easy-to-use program that allows you to easily generate CAD drawings of PT&P’s variables, constants, and rod hanger supports together with a complete bill of material. You may also send the drawings to info@pipingtech.com or 1+713-731-8640 (fax) for an immediate quote.

PHDS Software

Software Features

  • Generate 2D drawings of variable, constant, and rod hanger pipe supports from a large selection of pre-defined assemblies Save drawings as .dwg filesUse an Excel datasheet to generate drawings in batch mode Add a location plan to the drawings in PHDS or through the Excel datasheetGenerate drawings in either FPS, Metric, or SI units
  • Use a built-in function to submit drawing data to PT&P for quotation

13,900 lb. Load Pipe Shoes and Bronzphite® Slide Plate

April 2nd, 2004 No comments
13,900 lb. Load Pipe Shoes and Bronzphite® Slide Plate

13,900 lb. Load Pipe Shoes and Bronzphite® Slide Plate

Piping Technology and Products, Inc. recently designed and fabricated more than 75 pipe shoe and Bronzphite® slide plate assemblies for an oil refinery in Texas. Each assembly consists of two pipe clamps, a base plate and a maintenance free Bronzphite® slide plate. The pipe shoes with sizes ranging from 18 to 24 are fabricated from A387 alloy steel. They are designed for 965°F and 2 of horizontal movement.

The 3 x 3 Bronzphite® (graphite impregnated bronze) slide plates are self-lubricating bearing plates made of a high quality bronze with graphite filled grooves. They are designed for heavy loads, low velocity applications, and for situations where the use of oil or grease is undesirable or unfeasible.

Do you require pipe shoes or slide plates in your piping system? Let us price them for you today!
request-a-quote


Categories: Slide Plates Tags: ,

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy