Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
August — 2004 — The Pipe Supports Blog
Archive for August, 2004

84" Diameter Seawall Outfall Flow Regulating Device

August 20th, 2004 No comments
84" Diameter Seawall Outfall Flow Regulating Device

Installation of FRP Bundles in the Pipe

84" Diameter Seawall Outfall Flow Regulating Device

84" Diameter Seawall Outfall Flow Regulating Device

Sweco Fab, Inc. recently designed and manufactured a 30,000 lb. Seawall Outfall Flow Regulating Device for a sea water outlet in Qatar. This 320 long flow conditioner is designed to allow water to flow through evenly. There are nineteen 16 FRP pipes inside an 84 diameter carbon steel pipe. The pipe bundle is secured within the 84 diameter shell pipe using spring washers, which keep the bundle tight and allows for differential expansion between the steel and FRP.

84" Diameter Seawall Outfall Flow Regulating Device

Installation of Flow Device On-Site

 

84" Diameter Seawall Outfall Flow Regulating Device

Flow Device in Use

Want to learn more about the other products fabricated by Sweco Fab? Instantly view a Sweco Fab webinar today!


access-our-webinar-archives



Constants for Operating Loads of up to 25,000 lbs

August 13th, 2004 No comments
Constants for Operating Loads of up to 25,000 lbs

PTP-100 Type U

Constants for Operating Loads of up to 25,000 lbs

Constants for Operating Loads of up to 25,000 lbs

Piping Technology & Products, Inc. custom designed and fabricated PTP-100 type U and PTP-100 type A constants.  The PTP-100 type U constants are designed for operating loads of up to 17,000 lbs. and a travel range of 3.5″. They are fabricated from A36 carbon steel with dimensions of 32″x48″x13″. The PTP-100 type A constants are fabricated from the same material and measure 39″x42″x14″. The type A constants are designed to support loads up to 25,000 lbs. and enable downward travel of up to 4″. Standard load testing was performed to ensure product quality before shipping.

Do you require constant springs for your piping system? Get pricing today!

request-a-quote


14 1/2" diameter 225,000 lb. load Hydraulic Snubber

August 6th, 2004 No comments
14 1/2" diameter 225,000 lb. load Hydraulic Snubber

14 1/2" diameter 225,000 lb. load Hydraulic Snubber

Piping Technology & Products, Inc. recently designed and manufactured a hydraulic snubber weighing 4000 pounds for an oil refinery in Mexico.  The snubber is fabricated from carbon steel with dimensions of 17 x 101. It supports a maximum load of 225,000 lbs. The purpose of the hydraulic snubber is to reduce shock loading created by events such as water hammer or an earthquake. To meet customer specifications, the hydraulic snubber was coated with a three-coat paint system.

Do you see a need for hydraulic snubbers in your piping system? Get a quote today!
request-a-quote


Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy