Piping Technology and Products Logo

Piping Technology & Products

  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
September — 2004 — The Pipe Supports Blog
Archive for September, 2004

Constants for an Oil Refinery in Texas

September 17th, 2004 No comments
Constants for an Oil Refinery in Texas

Constants for an Oil Refinery in Texas

Constants for an Oil Refinery in Texas

PTP-100 Type B

Piping Technology & Products, Inc. recently fabricated 48 PTP-200 type U and 54 PTP-100 type B constants for an oil refinery in Texas.  The PTP 200 type U with base support constants are designed for operating loads ranging from 650 lbs. to 7700 lbs. and a travel range of 3″ to 4″. They are fabricated out of A36 carbon steel with dimensions ranging from 15″x22″ to 27″x38″. The PTP 100 type B constants are fabricated from A36 carbon steel with dimensions ranging from 11.5″x23″ to 12″x29″ and total travel of 3″ to 4″. These constants are designed for operation loads ranging from 1100 lbs. to 2800 lbs.  Space restrictions required a customized compact design. Standard load testing was performed to ensure product quality prior to shipping.

Do you require constant supports for your piping system? Let us price them for you today!

Pre-insulated Pipe Supports

September 10th, 2004 No comments
Pre-insulated Pipe Supports

Pre-insulated Pipe Supports

Piping Technology & Products, Inc. custom designed and manufactured 86 pre-insulated pipe supports for a customer. The pipe supports are specifically designed for use in cryogenic lines using polyurethane insulation that can withstand temperatures as low as -51° F. The supports weigh between 17 & 36 lbs. each and are designed for pipe sizes ranging from 2 to 4 in diameter. The clamp and base used with this pipe support are fabricated from A36 carbon steel. Upon customer’s request, a three layer customized paint was applied to the clamp and base.

Want to learn more about pre-insulated supports? View a pre-insulated support webinar today!


September 2004 News

September 1st, 2004 No comments

Piping Technology & Products, Inc. Acquires Companies from the Shaw Group, Inc

Houston, Texas, USA (August 31, 2004)-Piping Technology & Products, Inc. is proud to announce the acquisition of the essential assets and the manufacturing and engineering capabilities of the following companies from The Shaw Group Inc. (NYSE:SGR):

1. Shaw Fronek Company (FCI) Inc., Englewood, New Jersey

2. Shaw Pipe Supports Inc., Shreveport, Louisiana

3. Shaw A/DE, Inc., Laconia, New Hampshire

4. Shaw Pipe Shields, Inc., Vacaville, California

The Shaw Group has long been providing cost effective products for the power, petrochemical, chemical and commercial markets. PT&P is committed to upholding the standards that Shaw has set forth and will strive to make continuous improvement of all products and services. PT&P will work to understand and meet the requirements of new customers, as well as professionally execute all contracts acquired from Shaw.

“Piping Technology & Products is extremely excited about this acquisition,” said PT&P President Durga D. Agrawal. “The assets of these four companies strengthen our position as a leading producer in pipe hangers, mechanical and hydraulic snubbers, pre-insulated pipe supports and expansion joints.”

PT&P is consolidating the assets of some of the companies to the main location at 3701 Holmes Road, Houston, Texas 77051. The company can be reached via email at info@pipingtech.com, by fax at 713-731-8640 or by calling 713-731-0030 or 800-787-5914. PT&P can also be visited on the web at www.pipingtech.com.

This acquisition allows PT&P to enhance the existing product lines thus offering greater value and selection. The acquired companies will operate under the following company names:

1. Fronek Company (FCI), Inc.

2. FCI Pipe Supports, Inc.

3. Fronek Anchor/Darling Enterprises, Inc.

4. Pipe Shields, Inc.

About Piping Technology & Products, Inc.
Piping Technology & Products, Inc. and its wholly owned subsidiaries, U.S. Bellows, Inc. and Sweco Fab, Inc. manufacture a variety of high-quality engineered products. In business since 1975, PT&P has close partnerships with leading engineering and construction companies and is recognized as a leader in designing and manufacturing pipe supports, pre-insulated pipe supports and expansion joints. PT&P and its subsidiaries strive to, “DO IT RIGHT THE FIRST TIME, EVERY TIME” by providing quality products and expert service.

About The Shaw Group Inc.
The Shaw Group Inc. is a leading global provider of technology, engineering, procurement, construction, maintenance, fabrication, manufacturing, consulting, remediation, and facilities management services for government and private sector clients in the power, process, environmental, infrastructure and emergency response markets. A Fortune 500 company, The Shaw Group is headquartered in Baton Rouge, Louisiana, and employs approximately 17,000 people at its offices and operations in North America, South America, Europe, the Middle East and the Asia-Pacific region. For further information, please visit the Company’s website at www.shawgrp.com.

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy