Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla espaƱol
 
July — 2005 — The Pipe Supports Blog
Archive for July, 2005

Constants for an Energy Plant in Iowa

July 29th, 2005 No comments
Constants for an Energy Plant in Iowa

Constants for an Energy Plant in Iowa

This (PTP-13) size horizontal E-type constant is for an energy plant in Iowa. It measures 14″ 9″ 24″ with a total travel range of 5″ and an operating load of 388 lbs. It is fabricated out of A36 carbon steel, and weighs 95 lbs. Standard load and travel testing were performed on the constant prior to shipping to ensure quality.

Do you require constants for your current job? Get pricing today!


request-a-quote


60" Diameter Air Tank for a Manufacturing Facility

July 22nd, 2005 No comments

 

60" Diameter Air Tank for a Manufacturing Facility

60" Diameter Air Tank for a Manufacturing Facility

Side View of Air Receiver Tank

Side View of Air Receiver Tank

Sweco Fab, Inc. recently fabricated an Air Receiver Tank for a Manufacturing Facility in Alabama. This 5,400 lbs tank measured 60″ 143″ tangent to tangent and was designed for 170 PSIG and 200 F. It was fabricated from SA516-70 carbon steel. The interior and exterior were painted with standard epoxy paint to provide an interior lining and exterior protection. The tank was hydrotested at 221 PSIG to ensure product quality.

Want to learn more about products from Sweco Fab? View a past webinar today!


access-our-webinar-archives



Categories: Pressure Vessels/Tanks Tags:

Positive Anchor Hot Shoe for Oil Refinery

July 15th, 2005 No comments
Positive Anchor Hot Shoe for Oil Refinery

Positive Anchor Hot Shoe for Oil Refinery

The hot shoes were constructed using high temperature insulation made from calcium silicate, lined with a ceramic fiber blanket in a steel cradle (A36 Carbon Steel). The shoes were designed for 1500 F and a vertical load range between 25,000 lbs and 32,000 lbs, and the BOP was 10″. The overall diameter including 7″ of insulation is 49 7/8″. Belleville washers are used to hold bolt tension in pipeline with high frequency vibration.

Want to learn more about hot shoes? View a past pre-insulated webinar today!


access-our-webinar-archives



Constants for Energy Plant in Louisiana

July 1st, 2005 No comments
Constants for Energy Plant in Louisiana

Constants for Energy Plant in Louisiana

Piping Technology & Products, Inc. custom designed and manufactured Type 200-C constant springboxes for an energy plant in Louisiana.

The constant measures 23 x 40 designed for an operating load capacity of 8,300 lbs. and a total travel range of 8. The constant is fabricated of A36 carbon steel. To ensure quality,
standard load and travel tests were performed prior to shipping.

Do you see a need for constant spring supports in your piping system? Get pricing today!
request-a-quote


Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy