Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla espaƱol
 
Cold Shoe Pre-Insulated Anchors for an LNG Plant — The Pipe Supports Blog
Home > Pre-Insulated Pipe Supports > Cold Shoe Pre-Insulated Anchors for an LNG Plant

Cold Shoe Pre-Insulated Anchors for an LNG Plant

October 12th, 2005 Leave a comment Go to comments

Cold Shoe Pre-Insulated Anchors for an LNG Plant

Cold Shoe Pre-Insulated Anchors for an LNG Plant

Cold Shoe Pre-Insulated Anchors for an LNG Plant

Side View of Pre-Insulated Anchor

These cold shoes are used for anchoring pipelines against movement caused by thermal expansion and by fluid flow in the pipe. The total weight of the 10 cold shoes is 8,336 lbs. They have 4 1/2″ of insulation and are made to fit a 12″ pipe. Their length varies between 18″ to 24″ for 6″ to 12″ of axial movement. The cold shoe is made of polyurethane insulation and A36 carbon steel. They are drop-in-place anchors that only need to be welded into the pipe run and fastened to the pipe rack. They were manufactured to specific design loads and movements for an LNG plant in Georgia.

Want to learn more about pre-insulated supports? View a pre-insulated support webinar today!


access-our-webinar-archives



  1. No comments yet.
  1. No trackbacks yet.
You must be logged in to post a comment.

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy