Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
January — 2006 — The Pipe Supports Blog
Archive for January, 2006

3 Wedge Action Mechanical Joints for a Suspension Bridge

January 25th, 2006 No comments
3 Wedge Action Mechanical Joints for a Suspension Bridge

3 Wedge Action Mechanical Joints for a Suspension Bridge

Three wedge action mechanical joint restraints made of ductile iron materials were utilized to assist in the construction of a suspension bridge. Also, these mechanical joints provide for vertical and axial restraint for the bridge. Each weighs approximately 300 lb. and measures 24” long by 16” wide, and 12” tall for a 6”, 10”, and 12” ductile iron pipe. They are capable of supporting 50,000 lb. In addition, they are designed for seismic conditions with the ability for 7” of axial travel.

Do you require similar supports as those described above? Get pricing today!
request-a-quote


3 Cold Shoes for a LNG Plant in California

January 18th, 2006 No comments
3 Cold Shoes for a LNG Plant in California

3 Cold Shoes for a LNG Plant in California

3 Cold Shoes for a LNG Plant in California

Single Cold Shoe

These cold shoes are made of polyurethane for cryogenic pipe lines at a liquid nitrogen gas plant. They measure between 8” to 16” in diameter, 30” long with 4” of insulation. These cold shoes provide insulation in the support area where the regular pipe insulation (foam glass) is not sufficient to support the load.

Want to learn more about cold shoes? View a past cold shoe webinar today!


access-our-webinar-archives



88 Constant Supports for a Hydrogen Reformer Plant

January 4th, 2006 No comments
 88 Constant Supports for a Hydrogen Reformer Plant

88 Constant Supports for a Hydrogen Reformer Plant

These Figure PTP100-A size 40 and 51 constant supports, made of A36 carbon steel, are used to support pipeline systems. Each is 24″ long, 10 1/2″ wide, and 51 1/2″ high. These constants are capable of supporting loads ranging from 1,165 lb. to 2,260 lb. with a travel range of 13″ to 14 1/2″. PT&P specifically designed and fabricated each constant for specific dimensions provided by the customer. Standard load and travel testing was completed for quality assurance.

Do you require constants in your plant or refinery? Let us price them for you today!
request-a-quote


Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy