Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
August — 2006 — The Pipe Supports Blog
Archive for August, 2006

100 Type F Vertical Constant Supports

August 30th, 2006 No comments

 

100 Type F Vertical Constant Supports

100 Type F Vertical Constant Supports

These are constants known as 100 type F vertical constant supports. They support pipe from below by means of a sway strut. They are fabricated from A36 carbon steel and hot dipped galvanized to prevent rusting. The constant in the first picture maintains a constant load of 7,000 lb. while the constant in the second picture maintains a load of 9,000 lb. on the pipe throughout its 4” of total travel. They are 36” high with two gussets at the base plate to prevent the coil housing from collapsing under test loading and normal operation. Standard load and travel testing was performed on the constant to insure proper field operation.

Want to learn more about constants? Watch an engineered spring support webinar now!



access-our-webinar-archives



80ft. wide Cantilevered Canopy for an International Project

August 9th, 2006 No comments
80ft. wide Cantilevered Canopy for an International Project

80ft. wide Cantilevered Canopy for an International Project

Piping Technology & Products, Inc. fabricated a Cantilevered Canopy for the entrance of an International State Department building. The Canopy was fabricated using ten 20-foot long girders. These girders were connected by sixty-three structural steel members. Together, they formed the 80-foot width of the Canopy. The wooden sheathing and architectural cladding that is supported by the canopy’s inner steel structure was installed at the construction site.

The fabricated girders and structural members combined weight exceeds 33,000 lb.

Piping Technology & Products also supplied the steel framing that supports the sheathing and cladding, roof drains and piping installed inside the canopy.

Want to learn more about the miscellaneous structures we provide? Watch a webinar today!



access-our-webinar-archives



Structural Pipe Hangers for a Pipe Seismic Restraint Project

August 2nd, 2006 No comments
Structural Pipe Hangers for a Pipe Seismic Restraint Project

Structural Pipe Hangers for a Pipe Seismic Restraint Project

Structural Pipe Hangers for a Pipe Seismic Restraint Project in California

Close-Up View of MegaLug

Piping Technology & Products, Inc. and its wholly owned subsidiary, Pipe Shields, Inc. designed and fabricated many structural pipe hangers for an on-going project to rebuild the San Francisco-Oakland Bay Bridge. The pipe hangers are made out of A-36 carbon steel and galvanized to withstand corrosion from the ocean waters and rough winds. These pipe supports will be welded to Pipe Shields’ C Model Anchor Plates, which are set in a cast concrete to the bottom cavity of the bridge.

Structural Pipe Hangers for a Pipe Seismic Restraint Project in California

Structural Pipe Hangers

Supports pictured utilize friction holding devices known as MegaLug®, which permit attachment to the pipes without welding. These supports were designed and fabricated to include improvements in regard to strength and durability to withstand high loads during earthquakes and other seismic events.

Do you see a need for structural pipe hangers in your application? Get pricing now!
request-a-quote


Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy