Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
September — 2006 — The Pipe Supports Blog
Archive for September, 2006

Hot Shoes for a Power Plant in Argentina

September 27th, 2006 No comments
Hot Shoes for a Power Plant in Argentina

Hot Shoes for a Power Plant in Argentina

Hot Shoes for a Power Plant in Argentina

Hot Shoe Inspection

Piping Technology and Products, Inc. received an order for a power plant in Argentina from our Pipe Shields division. This order consisted of variable assemblies, constant support assemblies, sway struts, and pre insulated pipe supports. Pipe sizes supported were up to 42” with 3” of insulation ranging from 340 lb. to 1300 lb. All hot shoes were designed to carry the load, along with its own weight and insulation. Since these pre-insulated supports are used for high temperature pipes, PT&P used calcium silicate as insulation and hot dipped galvanized the steel as a rust inhibitor. Piping Technology and Products Inc. handled all logistics of the international shipment.

Do you require hot shoes for your plant or refinery? Let us price them for you today!


request-a-quote


Sway Braces with Ball Joints

September 13th, 2006 No comments
Sway Braces with Ball Joints

Sway Braces with Ball Joints

Sway Braces with Ball Joints

Sway Braces with Ball Joints

These special sway braces that are subject to the banana effect were designed to specific requirements for a Coker Plant in Texas. With deflection capability of up to plus or minus 9″ in all directions, these sway braces are used to stabilize tall stacks. Five springs in tandem prevent binding during operation, and are necessary due to extreme length. The sway braces ranged from 70″ to 144″ in length and can handle up to 8,000 lbs. The precision machined pivoting ball joints positioned at each end allow for freedom of movement in any unpredictable direction.

Do you see a need for sway braces in your current job? Get pricing today!
request-a-quote


Anchor Bolts for Boiler Feed Water Pump Turbine Drives

September 6th, 2006 No comments

 

Anchor Bolts for Boiler Feed Water Pump Turbine Drives

Anchor Bolts for Boiler Feed Water Pump Turbine Drives

These are special high-strength anchor bolts used in a coal-fired power plant to secure the water pumps’ foundation. They range from 1” to 3 1/2” in diameter and 137” in length. The actual bolts are made from ASTM low Alloy Steel F1554-04, grade 55. This steel has a tensile strength of 517-655 Mpa, (75-95 Ksi), and a yield strength of 380 Mpa, (55 Ksi). The nuts are made from ASTM A563, grade A, and the washers from ASTM F436, Type 1. The bolts are threaded per UNC threading, class 2A fit, and the finish is plain.

Do you have a requirement for anchor bolts? Let us price them for you today!
request-a-quote


Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy