Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
January — 2007 — The Pipe Supports Blog
Archive for January, 2007

58" Floating Rings for a Process Plant

January 31st, 2007 No comments
58 Floating Rings for a Process Plant

58 Floating Rings for a Process Plant

58" Floating Rings for High Temperatures of up to 1200°F for a Polypropylene Plant

Floating Ring in the Field

58" Floating Rings for High Temperatures of up to 1200°F for a Polypropylene Plant

58" Floating Ring Being Installed

58" Floating Rings for High Temperatures of up to 1200°F for a Polypropylene Plant

Floating Ring in the Field

58″ Floating Rings
- Sizes Range from 19″ I.D. to 91 1/2″ I.D.
- ASTM A-240 Grade 316H Stainless Steel
- 100% Dye Penetrant Tested on all Weld Seams

Do you have a requirement for floating rings in your piping system? Get pricing today!
request-a-quote


Categories: ASME/Miscellaneous Fabrication Tags:

Cryogenic Supports for an LNG Plant

January 24th, 2007 No comments
Cryogenic Supports for an LNG Plant

Cryogenic Supports for an LNG Plant

 

Cryogenic Supports for an LNG Plant

40 " Pipe - 8 1/2" Insulation Thickness

Cryogenic Supports for an LNG Plant

Close-up of Belleville Spring Washer

Belleville spring washers are installed on the studs to keep tension on the bolts due to pipe contraction at cryogenic temperatures. The top half of the cold shoe is constructed of 10 lb density polyurethane foam and the bottom half of the shoe is constructed of 20 lb density polyurethane foam to support the weight of the pipe.

Want to learn more about pre-insulated pipe supports? Instantly view a past webinar!


access-our-webinar-archives



Steel Structural Supports for an Aluminum Smelter Plant

January 10th, 2007 No comments
Steel Structural Supports for an Aluminum Smelter Plant in Iceland

Steel Structural Supports for an Aluminum Smelter Plant in Iceland

Steel Structural Supports for an Aluminum Smelter Plant in Iceland
Steel Structural Supports
Steel Structural Supports for an Aluminum Smelter Plant in Iceland

Steel Structural Supports

Structural Supports fabricated for an aluminum smelter plant located in Iceland
- Designed to support a process piping system
- Process piping is secured by u-bolts to the slotted supports
- Three coat paint system applied

Do you have a need for structural supports in your current project? Get pricing today!
request-a-quote


Categories: ASME/Miscellaneous Fabrication Tags:

Upthrust U-Type Constant for an Energy Plant

January 3rd, 2007 No comments
Upthrust U-Type Constant for an Energy Plant

Upthrust U-Type Constant for an Energy Plant

Piping Technology & Products, Inc. Designed and Fabricated a Upthrust U-Type Constant for an Energy Plant in California

- Designed for a constant load of 7,733 lb.
- Travel ability is from 0 to 9 inches of total travel
- The constant’s shipping and installation setup is for downward travel
- The constant spring support has been custom designed to reduce its take-off from 36 7/8″ to 29 1/2″

Do you have a need for u-type constants in your plant? Get pricing today!
request-a-quote


Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy