Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
October — 2007 — The Pipe Supports Blog
Archive for October, 2007

Base Insulated Supports

October 31st, 2007 No comments
Base Insulated Supports

Base Insulated Supports

 

Base Insulated Supports

Base Insulated Supports

PT&P fabricated base insulated supports used to minimize thermal conductivity between the base and un-insulated lines. The support is designed with a carbon steel bottom and a stainless steel upper for cryogenic temperatures of -300°F. The insulation is made of 20 PCF polyurethane block. These supports are designed to handle lateral and axial pipe loads. They also include a wear pad for extra pipe reinforcement, which prevents local deformation of the pipe.

Do you require base insulated supports for project? Let us price them for you today!
request-a-quote


10" Beam Clamp Assemblies for an Electric Plant in West Virginia

October 17th, 2007 No comments
10" Beam Clamp Assemblies for an Electric Plant in West Virginia

10" Beam Clamp Assemblies for an Electric Plant in West Virginia

10" Beam Clamp Assemblies for an Electric Plant in West Virginia

Beam Clamp

These beam clamp assemblies are fabricated from carbon steel with a hot-dipped galvanized finish. The clamp is designed to support a pipe that is 10″ in diameter and is capable of loads up to 3,600 lb. The rod measures 7/8″ in diameter.

The function of the beam clamp assembly is to support the pipe and allow it to swing. The clamp requires no welding which allows for a quick and easy installation.

Do you require beam clamp assemblies in your project? Get pricing today!


request-a-quote


October 2007 News

October 15th, 2007 No comments

PT&P is Now ISO 9001:2000 Certified (October 13, 2007) Piping Technology & Products, Inc. is awarded the ISO 9001:2000 certificate by DNV Certification, a division of Det Norske Veritas (DNV), for the Manufacture of Hot and Cold Pipe Supports. This certificate proves that PT&P’s Quality Management System has been certified against the best practice standard and is compliant.

View Benefits of ISO 9001:2000

View ISO 9001:2000 Certificate

ISO 9001;2000

ISO 9001:2000

The latest version of standards, ISO 9001:2000 is created by the International Organization for Standardization (ISO), who set international requirements for Quality Management Systems. By conforming to the Quality Management System, Piping Technology & Products, Inc. demonstrates predictability of internal operations and the ability to meet customer requirements. While becoming certified, a company can identify the areas that are most critical to operations through management system audits. Once problem areas are identified, measured, managed and improved, customer satisfaction will rise, staff responsibility and motivation will also experience growth.

80" U-Type Constants for a Power Plant

October 10th, 2007 No comments
80" U-Type Constants for a Power Plant

80" U-Type Constants for a Power Plant

- U-Type constant spring supports for a power plant in Thailand
- Fabricated from A36 carbon steel
- Dimensions = 25″W x 28″H x 80″L
- Load = 24,000 lb.
- 3″ of total travel upward
- Standard load and travel testing was performed

Want to learn more about constant springs? Instantly view a constant webinar today.


access-our-webinar-archives



Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy