Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
March — 2010 — The Pipe Supports Blog
Archive for March, 2010

Custom Sway Brace Supports

March 30th, 2010 No comments
Custom Sway Brace Supports

Custom Sway Brace Supports

The sway braces will be used in pairs to support a 72″ diameter cooling tower supply line via a common attachment point. The internal components and housing are fabricated from carbon steel, and A-5160 spring steel was used for the coil. Each sway brace has a spring rate of 10,100 lb/in. with an overall available travel of 3″. The adjustable ends are configured so that one end bracket is interlocked with the mating end bracket of its sister sway brace; therefore, enabling them to be connected to the pipe by a single lug.

Do you require sway braces for an upcoming project? Let us price them for you today!
request-a-quote

Instrument Stands for a Heavy Oil Refinery

March 16th, 2010 No comments
Instrument Stands for a Heavy Oil Refinery

Instrument Stands for a Heavy Oil Refinery

PT&P manufactured 55 instrument stands from carbon steel with a hot-dipped galvanize finish. They are 75″ tall and 90″ wide, and will support various instruments and junction boxes in a heavy oil refinery.

Want to learn more about instruments stands? Watch a instant webinar on our miscellaneous fabricated products!
access-our-webinar-archives

Foam Glass – PUF Hybrid Cold Supports for 16″ Dia. Pipe

March 9th, 2010 No comments
Foam Glass – PUF Hybrid Cold Supports for 16″ Dia. Pipe

Foam Glass – PUF Hybrid Cold Supports for 16″ Dia. Pipe

These foam glass-PUF hybrid insulated supports are designed for a temperature range of 77°F to -300°F. They are designed for a 16″ diameter pipe and have a load capacity of 11,050 lb. The 2-1/2″ thick insulation consist of foam glass on the upper half and polyurethane (PUF) on the bottom half. The clamps, ribs and base are fabricated from A-36 carbon steel.

Want to learn more about cold supports? Watch an instant webinar on cold shoes!
access-our-webinar-archives

22" Dia. Riser Clamps for a Power Plant

March 2nd, 2010 No comments
22″ Dia. Riser Clamps

22″ Dia. Riser Clamps

All four riser clamps are manufactured from A-36 carbon steel plates and are coated with red oxide primer for rust prevention. They are 22″ in diameter with each plate measuring 2″ thick by 12″ wide by 65″ long. Each riser clamp is capable of supporting loads of up to 38,000 lb. and will be used in a power plant to support “downcomer” lines.

Do you see a need for riser clamps in your current or upcoming project? Let us price them now!
request-a-quote

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy