Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla espaƱol
 
Big Ton Springs with a Custom 3-Coat Paint System — The Pipe Supports Blog
Home > Engineered Spring Supports > Big Ton Springs with a Custom 3-Coat Paint System

Big Ton Springs with a Custom 3-Coat Paint System


Big Ton Springs with a Custom 3-Coat Paint System

Big Ton Springs with a Custom 3-Coat Paint System

PT&P fabricated big ton spring supports for an expedited delivery of six weeks from conceptual design to final delivery. The big tons measure 26″ long x 26″ deep x 34-5/8″ tall and will be used to support substantial vertical loads while simultaneously providing a base support structure. They are designed for operating loads of 36,000 lb. with a travel of .5625″ down.

Due to the harsh and corrosive environment, the exposed metal surfaces were finished with a three-coat urethane paint while the threaded components were cadmium plated with a blue Fluorocarbon coating. The big tons were also salt water spray tested according to ASTM B117 standards, and load tested to verify the springs’ functionality throughout the entire travel range.

Do you need big ton springs for your piping system? Get pricing today!
request-a-quote

  1. No comments yet.
  1. No trackbacks yet.
You must be logged in to post a comment.

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy