Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
June — 2010 — The Pipe Supports Blog
Archive for June, 2010

399 Pre-Insulated Pipe Supports for a LNG Facility

June 29th, 2010 No comments
Pre-Insulated Pipe Supports for 56" pipe size

Pre-Insulated Pipe Supports for 56" pipe size

Piping Technology & Products, Inc manufactured the pre-insulated supports with 4″ of insulation thickness for pipe sizes ranging from 36″ to 56″ in diameter.

Pre-Insulated Pipe Supports for 36" pipe size

Pre-Insulated Pipe Supports for 36" pipe size

The cold shoes were fabricated from a combination of 10 and 20 PCF of polyurethane insulation. They also include a vapor barrier, aluminum jacket, acoustic layer, and are coated with a hot dipped galvanized finish. The supports will be used for a project in North Africa.

Want to learn more about pre-insulated supports? Watch a recording of a past webinar!
access-our-webinar-archives


Custom U-Type Constant Spring Supports with Slide Plates

June 15th, 2010 No comments
Custom U-Type Constant Spring Supports with Slide Plates

Custom U-Type Constant Spring Supports with Slide Plates

PT&P fabricated 12 constant spring supports of various sizes with PTFE, 25% glass filled slide plates. The smallest constant is 38.25″ length x 13″ width x 28″ height, and the largest is 52″ length x 19″ width x 28″ height. The designed loads vary from 13,264 lb. to 15,962 lb. and the total travel range is 2″ to 3″.

Do you require constants or slide plates in your piping system? Get a quote today!

request-a-quote

Custom Constant Spring Hangers and Pipe Clamps

June 8th, 2010 No comments
Custom Constant Spring Hangers and Pipe Clamps

Custom Constant Spring Hangers and Pipe Clamps

The constant spring hangers are manufactured from A36 carbon steel and have custom 4-bolt pipe clamps due to heavy loads. The dimensions are 40″ length x 18″ width x 85″ height and are designed for a 1,784 lb. load with 10″ of travel. The constants will be used to support radiant inlet manifolds and have a unique paint applied due to the highly corrosive condition. The entire pipe hanger assembly went through load and travel testing prior to shipping.

Want to learn more about constant springs? Instantly view a past constant webinar!
access-our-webinar-archives

Pre-Insulated Pipe Supports for an LNG Plant

June 1st, 2010 No comments
Pre-Insulated Pipe Supports for an LNG Plant

Pre-Insulated Pipe Supports for an LNG Plant

PT&P manufactured a total of 1,400 supports for an LNG project. 75 of those supports were cold supports completed in less than one week on an emergency basis. The cold shoes were fabricated from a combination of polyurethane foam, carbon steel metal straps, and an aluminum metal jacket for insulation. They are designed for temperatures as low as -300°F and pipe sizes ranging from 12″ to 36″ in diameter. The 36″ diameter shoes are designed for a vertical load of 102,000 lb. and the 12″ diameter shoes are designed for 36,000 lb. load.

Do you require pre-insulated supports in your piping system? Get a quote from us now!
request-a-quote

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy