Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
October — 2012 — The Pipe Supports Blog
Archive for October, 2012

Variable Spring Hanger and Structural Steel Assembly for a Solar Electric Generating System

October 28th, 2012 Comments off

Variable Spring HangersVariable Spring Hanger and Structural Steel Assembly

These variable spring hangers were designed for a 10″ pipe line in a solar electric generating system. All assemblies were fabricated from A-36 carbon steel with a hot-dipped galvanize finish. The picture on the left shows a structural steel assembly supporting a PTP-1 variable spring and a Fig.80 heavy 3-bolt clamp designed for a 3,789 lb. load. The picture on the right shows two PTP-2 variable spring hangers welded to a structural steel beam designed for a 675 lb. load. Each pipe hanger assembly went through standard load and travel testing prior to shipping.

Giveaway Winner

October 26th, 2012 Comments off

We had a great turnout for our U.S. Bellows Expansion Joint In-Depth Webinar on October 24th. We are proud to announce the winner of our drawing for the EJMA Standards Ninth edition is George. Be on the lookout for our next giveaway!

Categories: Piping Technology News Tags:

200 E-Type Horizontal Constant Spring Supports for a Fired Heater Radiant Manifold

October 15th, 2012 Comments off

200 E-Type Horizontal Constant Spring Supports for a Fired Heater Radiant Manifold

These 200 E-Type horizontal constant spring supports are fabricated from A-36 carbon steel with a hot-dipped galvanize finish. The pins made for constants operation are A-322-4140 high strength carbon steel. The constants range in size from 22-3/4″ to 26-1/4″ heights, 60″ to 90″ lengths, 18″ width, and 19-1/2″ to 23-1/2″ in coil housing diameters. They are designed for 23,160 lb. to 33,700 lb. loads and 6-1/2″ to 14″ of total travel. A total of sixteen assemblies were custom designed for a fired heater radiant manifold. Each pipe hanger assembly went through standard load and travel testing prior to shipping.

Variable Spring Supports with Permanent Upward Travel Stops

October 2nd, 2012 Comments off

Five total assemblies of custom designed variable spring supports were made for an oil refinery in the United Arab Emirates. These springs required a permanent upward travel stop. The spring cans were supplied with PTFE and polished stainless steel slide plates attached to carbon steel load flange. All materials used were domestic (from the U.S.). The springs were tested for lateral loads. The spring coils were stress tested and can withstand temperatures of 176°F (80°C), with a downward movement of 30mm – 45mm.

Categories: Engineered Spring Supports Tags:

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy