Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla espaƱol
 
February — 2013 — The Pipe Supports Blog
Archive for February, 2013

47 Hold-Down Pipe Clamps Designed for a Coal Fired Power Plant

February 25th, 2013 Comments off

47 Hold-Down Pipe Clamps Designed for a Coal Fired Power Plant

PT&P designed and fabricated forty-seven hold-down pipe clamps for a coal fired power plant in Louisiana. The hold-downs are fabricated from carbon steel and range in size from 2″ to 10″ in diameter. The HD-3 is an arrestor type hold down used when there is very low thermal movement. Its radius is lined with a belting material that is well designed to absorb shock from vibration.

8-Part Webinar Series: How Piping Design & Analysis Influences Pipe Support Selection & Design

February 25th, 2013 Comments off

This series is now a course offered through the University of Houston… view more details at http://www.pipingtech.com/blog/2013/07/25/ptp-partners-with-university-of-houstons-college-of-technology/

Piping SystemOur technical experts take you through piping, design considerations, effects on overall configuration, preliminary piping design, initial layout, the total system, introduction to pipe stress analysis, detailed piping design, and how all of this influences pipe support and pipe hanger design.

G-Type Constant Spring Support, 96″ Long by 40″ High, Designed to Support a 12,818 lb. Load

February 10th, 2013 Comments off

G-Type Constant Spring Support, 96" Long by 40" High, Designed to Support a 12,818 lb. Load
This PTP-100 Type-G constant spring support is 96″ long by 40″ high and will support a 12,818 lb. load. It has an actual travel of 0.3″ and total travel of 1-1/2″. The G-type constant is comprised of two standard constant spring housing sub-assemblies joined together with an intermediate bridge assembly. The bridge assembly is customized to handle up to 26,000 lb. of hydro load. The G-type assembly allows for use in applications with limited space. Special identification tags were installed in addition to PT&P’s standard name plates per the customer’s request. Standard testing was performed and witnessed by an outside inspector prior to shipment.

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy