Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
April — 2013 — The Pipe Supports Blog
Archive for April, 2013

Pre-Insulated Pipe Supports for both Cryogenic and High Temperature Applications

April 25th, 2013 Comments off

This Webinar is over, view the recording at: http://info.pipingtech.com/pre-insulated-support-webinars/

 

Cold ShoesExplore how Polyurethane foam is produced, from mixing polyols and isocyanates to inspecting the final product. Learn about anchor shoe testing, lateral load testing, compressive strength testing, and axial load testing. Increase your understanding of the value-added services that are offered by PT&P, and rest assured that your Pre-Insulated Pipe Support needs can be covered by our 24×7 web-based emergency services, providing field service, and quick-turn around time when you need it most.

The featured presenter, Jerry Godina has over 15 years experience as a pipe support designer and manages PT&P’s engineer training development program. He also inspects existing supports, consults on site remediation projects and oversees installation on a regular basis.

 

C-Type Variable Spring Support Assemblies Designed for an Oil Sands Mine

April 21st, 2013 Comments off

C-Type Variable Spring Support Assemblies Designed for an Oil Sands Mine

PTP-2 160 C-Type variable spring support assemblies were designed and fabricated for an oil sands mine in Canada. The variables are 8″-12″ diameter, 16″ to 32-1/2″ overall length, and designed for an operating load of 5590 lb. with an upwards travel of 0.787″. The variables were fabricated from carbon steel with a hot-dipped galvanized finish and standard load and travel testing was completed prior to shipment.

Custom Sway Brace and Variable Spring Assemblies Designed for an Aerospace Development Facility

April 8th, 2013 Comments off

Custom Sway Brace and Variable Spring Assemblies Designed for an Aerospace Development Facility

These custom designed sway braces and variable spring assemblies were designed for hanger duct work in an aerospace development facility. The assemblies measure 67-1/2″ long with a 14-1/8″ O.D. The variables are a modified F-type spring with a pivoting base and non-standard coil combination, including a nested spring design. The assemblies include fully adjustable travel stops and custom end brackets. They are fabricated from carbon steel and designed for load ranges between 1100 lb. and 9250 lb. with a spring rate of +/- 2.78″.

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy