Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
August — 2013 — The Pipe Supports Blog
Archive for August, 2013

81 Pipe Shoes Designed for a Solar Power Plant in California

August 24th, 2013 Comments off

81 Pipe Shoes Designed for a Solar Power Plant in California

PT&P designed and manufactured eighty one custom pipe shoes for a solar power plant in California. The shoes will support heat transfer in fluid pipes at the facility. They consist of 3/8″ stainless steel slide plates and microtherm insulation. The shoes measure 10″ wide, 10″ height, and 18″ in length with a 750°F operating temperature. The assemblies have a vertical operating load of 10,000 lb. with 2″- 3″ of axial movement.

100-B Type Constant Spring Supports Designed with Double Transverse Lugs for a Refinery in Mexico

August 16th, 2013 Comments off

100-B Type Constant Spring Supports Designed with Double Transverse Lugs for a Refinery in Mexico

These 100-B Type vertical constant spring supports were designed with double transverse lugs for a refinery in Mexico. The constants were fabricated from A-36 carbon steel and they range in size from 23-1/4″ to 26-5/8″ in height, 50″ to 78″ in length and 18-3/8″ to 18-3/4″ in width. They are designed for operating loads ranging from 8,000 – 27,000 lb. and upward movements ranging from 3″ to 7″. The double transverse lugs allow the entire constant to swivel with the rod. Standard load and travel tests were performed prior to shipment.

F-Type and C-Type Variable Spring Supports for an Acid Plant in Canada

August 4th, 2013 Comments off

F-Type and C-Type Variable Spring Supports for an Acid Plant in Canada

PT&P designed and fabricated F-type and C-type variable spring supports for an acid plant in Canada. The variables range from 4″-8″ in diameter and can accommodate between .039″– 5.02″ in movement. They are designed for an operating temperature of 200°F and operating loads between 509 lb. and 13,489 lb. The variable springs are coated with a red oxide coating to protect against corrosion and underwent standard and load travel tests prior to shipment.

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy