Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla espaƱol
 
June — 2015 — The Pipe Supports Blog
Archive for June, 2015

Custom Designed Pipe Hanger & Clamp Assemblies for a Flue-gas Desulfurization Application

June 29th, 2015 Comments off

Custom Designed Pipe Hanger & Clamp Assemblies for a Flue-gas Desulfurization Application

PT&P custom designed pipe hanger and clamp assemblies for a flue-gas desulfurization application in an energy facility located in Kansas. The assemblies are designed for pipes ranging in size from 2-1/2″ to 6″ in diameter, and are capable of a 650 lb. operating load. Materials include tube steel, fig. 92 washer, fig. 122 all threaded rod, fig. 30 turnbuckle, fig. 40 weldless eyenut and fig. 70 pipe clamp.

Insulated Pipe Supports Designed for Cryogenic and High Temperature Pipe Systems for an Ammonia Project

June 21st, 2015 Comments off

Insulated Pipe Supports Designed for Cryogenic and High Temperature Pipe Systems for an Ammonia Project

PT&P custom designed 98 insulated pipe supports for an ammonia project at a chemical plant in Louisiana. The supports were designed for cryogenic and high temperature pipe systems, with a 8″ to 22″ baseplate width and 10″ to 28″ saddle length. They were designed for pipe diameters of 6″-24″ and are comprised of polyurethane foam for cryogenic and FTM insulation for high temperatures. Standard Q.C. and dimensional tests were performed prior to shipment.

Stainless Steel Roller Stands Custom Designed for a Wastewater Treatment Plant

June 8th, 2015 Comments off

Stainless Steel Roller Stands Custom Designed for a Wastewater Treatment Plant

PT&P designed spring loaded stainless steel roller stands for a wastewater treatment plant. The rollers were custom designed for ease of assembly to support a 30″ diameter pipeline. They include eight springs in two spring housings and are designed for 1,000 lb. load. The base plate is 18-3/4″ x 13″ and the BOP is 10-3/16″. Roller stands are used to support pipelines that expand and contract longitudinally in the axial direction and where vertical adjustment is not necessary.

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy