Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
October — 2015 — The Pipe Supports Blog
Archive for October, 2015

36” Dia. Cryogenic Pipe Saddles Designed for an LNG Facility

October 23rd, 2015 Comments off

36” Dia. Cryogenic Pipe Saddles Designed for a LNG Facility

36” Dia. Cryogenic Pipe Saddles Designed for an LNG Facility

PT&P custom-designed pipe saddles with micarta base insulation for an LNG facility in Australia. The saddles were fabricated from 304L stainless steel plates with thickness ranging from 1/8” to 3/8”. The micarta blocks range in thickness from ¼”-3”. The saddles were designed to support pipes up to 36” in diameter at an operating temperature of -300°F. Standard Q.C. and dimensional tests were performed prior to shipment.

Custom Variable Spring Supports Designed for a Furnace Application in an Ammonia Plant

October 19th, 2015 Comments off

Custom Variable Spring Supports Designed for a Furnace Application in an Ammonia Plant

Custom Variable Spring Supports Designed for a Furnace Application in an Ammonia Plant.

PT&P custom designed variable spring supports and hangers for a furnace application in an ammonia plant. The furnace springs are fabricated from carbon steel and painted with a red-oxide primer to help prevent corrosion. The spring supports are designed to support loads ranging from 400 lb. to 12,500 lb. Over 150 spring coils underwent calibration test prior to fabrication and insertion into the variable support housing to ensure variance of less than 5%.

24″ Hold-down Clamps for a Natural Gas Plant in Colorado

October 5th, 2015 Comments off

24" Hold-down Clamps for a Natural Gas Plant in Colorado

24″ Diameter HD-2 Hold-down Clamps for a Natural Gas Plant in Colorado.

PT&P designed and manufactured these standard HD-2 hold-down clamps for a natural gas plant in Colorado. They are fabricated from carbon steel and designed with PTFE slide plates. The hold-downs are designed for 8″ to 24″ diameter pipes and operating temperature up to 400°F.

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy