Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
Variable Spring Hangers Designed for an Upstream and Valve Project in Thailand — The Pipe Supports Blog
Home > Engineered Spring Supports > Variable Spring Hangers Designed for an Upstream and Valve Project in Thailand

Variable Spring Hangers Designed for an Upstream and Valve Project in Thailand

February 19th, 2016

Variable Spring Hangers Designed for an Upstream and Valve Project in Thailand

PT&P designed and manufactured these variable spring hanger assemblies for an upstream and valve project in Thailand. The variables clamp sizes range from 6″ to 12″ diameter with installed heights ranging from 6-8/8″ to 12-1/4″ from the structure to the center of the pipe. The B-Type pipe hanger assembly uses coil springs to support the load and allow for some movement. They are furnished with one lug welded to the top of the spring casing which allows the assembly to be suspended from structural members for pipe support. All forty-seven variable spring supports were quality checked with a 100% spring coil deflection test and a load cell calibration to set the assemblies at the prescribed installed load.

Comments are closed.

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy