Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla espaƱol
 
September — 2016 — The Pipe Supports Blog
Archive for September, 2016

Variable Spring Supports Designed for a Furnace Application in Oklahoma

September 26th, 2016 Comments off

Variable Spring Supports Designed for a Furnace Application in Oklahoma

Type: Variable Spring Supports
Design: 1,765 lb. Load | +/- 5% Spring Rate
Material: Carbon Steel with Red Oxide Primer
Testing: Standard Spring Rate & Calibration Tests

PT&P custom designed variable spring supports for a furnace application at a Nitrogen Facility in Oklahoma. The furnace springs are fabricated from carbon steel and painted with a red-oxide primer to help prevent corrosion. The spring supports are designed to support loads up to 1,765 lb. With a spring rate calibrated to be within +/- 5% of the theoretical value.

Single Expansion Joints Product Video

September 16th, 2016 Comments off

Big Ton Spring Supports Custom Designed for an LNG Facility

September 13th, 2016 Comments off

Big Ton Spring Supports Custom Designed for an LNG Facility

Type: Big Ton Spring Supports with PTFE Slide Plates
Size: 29-7/8″ x 29-7/8″ 16-1/2″
Material: Carbon Steel with HDG Finish | PTFE, 25% Glass Filled Slide Plate
Testing: Tested in a press connected to the load cell

PT&P custom designed big ton spring supports with PTFE slide plates for an LNG facility in Australia. The components within the spring housing include load columns, travel stops, spring coils and lifting lugs. Each assembly is designed for an operating load ranging from 16,276 lb. to 34,479 lb. and will allow for movement between 0.16″ and 0.24″. They are fabricated from hot-dipped galvanized carbon steel and measure 29-7/8″ x 29-7/8″ x 16-1/2″. The big ton spring support is ideal for applications that have very heavy loads with thermal expansion because of the stability they provide throughout the range of travel. These supports were tested in the press connected to a load cell to insure proper operation throughout the entire working range of the coils.

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy