Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla espaƱol
 
Variable Spring Hangers Designed for an Ammonia Plant — The Pipe Supports Blog
Home > Engineered Spring Supports > Variable Spring Hangers Designed for an Ammonia Plant

Variable Spring Hangers Designed for an Ammonia Plant

January 9th, 2017

Variable Spring Hangers Designed for an Ammonia Plant

Type: B-Type Variable Spring Hanger
Size: PTP-2 Standard Variable Spring
Material: Hot-dipped Galvanized Carbon Steel
Design: 0.955″ Downward Movement | Cold Load: 12,183 lb. | Hot Load: 14,723 lb.
Testing: Hydro-load Test: 15,750 lb.

PT&P designed and fabricated variable spring hangers for an Ammonia Plant in Louisiana. This B-Type PTP-2 variable hanger is fabricated from carbon steel and hot-dipped galvanized to protect against corrosion. The variable is designed for 0.955″ of downward movement and an installed load of 12,183 and an operating load of 14,723 lb. This variable included a 1″ forged steel clevis and the assembly was tested at a hydro-load of 15,750 lb.

Comments are closed.

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy