Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
Big Ton Spring Supports Designed for a Liquid Natural Gas Facility in Australia — The Pipe Supports Blog
Home > Engineered Spring Supports > Big Ton Spring Supports Designed for a Liquid Natural Gas Facility in Australia

Big Ton Spring Supports Designed for a Liquid Natural Gas Facility in Australia

February 7th, 2017

Big Ton Spring Supports Designed for a Liquid Natural Gas Facility in Australia

Type: Big Ton Spring Supports
Size: 19-5/8″ x 19-5/8″ x 15″
Material: Hot-dipped Galvanized Carbon Steel | A193 Gr. B7
Design: Movements: 3/16 ” – 1/4″ | 16,619 lb. Load
Testing: Load Cell throughout Operating Range

These big ton spring supports were designed for a liquid natural gas (LNG) plant in Australia. They were selected because the application required supporting heavy loads as the supported equipment undergoes thermal expansion during operation. The assemblies are fabricated from hot-dipped galvanized carbon steel. The travel stop rods and nuts material is A193 Gr. B7. The units measure 19-5/8″ x 19-5/8″ x 15″ and are capable of supporting loads up to 13,619 lb. while accommodating movements from 3/16″ to 1/4″. The big tons were tested with a load cell to insure proper operation throughout the big ton’s operating range.

Comments are closed.

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy