Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
July — 2017 — The Pipe Supports Blog
Archive for July, 2017

Big Ton Spring Supports Designed for a 98,250 lb. Load

July 24th, 2017 Comments off

Big Ton Spring Supports Designed for a 98,250 lb. Load

Type: Big Ton Spring Supports
Size: 29″ wide x 110″ long x 35″ high
Material: HDG Carbon Steel | A193 Gr. B7 Travel Stops and Load Column
Design: 98,250 lb. | 1-3/4″ Upward
Testing: Load Cell Test

This big ton spring support assembly was designed for a facility in Kansas. The assemblies are fabricated from hot-dipped galvanized carbon steel and include neoprene coated springs coils. The travel stops and load column material is A193 Gr. B7. The units measure 29″ wide x 110″ long x 35″ high and are capable of supporting loads up to 98,250 lb. while accommodating movements from 1-3/4″ upward. The big tons were tested with a load cell to insure proper operation throughout the big ton’s operating range.

C-Type Constant Spring Supports for a Refinery in Texas

July 10th, 2017 Comments off

C-Type Constant Spring Supports for a Refinery in Texas

Type: Constant Spring Supports
Size: 25″ in Height x 17-38″ in Length x 11-5/8″ in Width
Material: A-36 Carbon Steel with HDG Finish
Design: 981 lb. to 1828 lb. load | 2-1/2″ to 3″ Vertical Movement Range
Testing: Standard Load and Travel Testing per MSS Standards

Piping Technology & Products, Inc. designed and manufactured C-type constant spring support assemblies for a refinery in Texas. The constants are 25″ in height, 17-3/8″ in length, and 11-5/8″ in width. Their load capacities range from 981 lb. to 1828 lb., with a vertical movement ranging from 2-1/2″ to 3″. All constants were fabricated from A-36 carbon steel with a hot-dipped galvanized finish, and underwent standard load and travel testing per MSS Standards prior to shipment.

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy