Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla espaƱol
 
August — 2017 — The Pipe Supports Blog
Archive for August, 2017

U-Type Constant Spring Supports Designed for a Power Plant

August 20th, 2017 Comments off

U-Type Constant Spring Supports Designed for a Power Plant

Type: Constant Spring Supports
Material: Carbon Steel | HDG | PTFE, 25% Glass Filled
Design: 8,200 lb. Load | 11-1/2″ Total Travel
Testing: Standard Load and Travel Test

PT&P designed and manufactured 48 constant spring supports for a power plant in Mexico. The constants pictured above are Fig. 200 U-type constant spring supports fabricated from A-36 carbon steel and include PTFE, 25% glass filled slide plates bonded to the load flange. The supports are 39″ H x 26″ W x 80″ L and are designed for operating loads up to 8,200 lb., with a total travel of 11-1/2″. These are horizontal constants designed to support piping from below in conjunction with a pipe saddle. All the constants went through standard load and travel testing per MSS Standards prior to shipment.

PT&P’s Sizzling Summer: Supports, Services & Safety

August 8th, 2017 Comments off

Variable Spring Supports for a Furnace application at an Ammonia Plant

August 7th, 2017 Comments off

Variable Spring Supports for a Furnace application at an Ammonia Plant

Type: Variable Spring Supports
Material: Carbon Steel | Red-Oxide Primer | 304 SS
Design: 3,000 lb./in.
Testing: Load Test

PT&P custom designed variable spring support assemblies for a furnace application at an ammonia plant. The furnace springs are fabricated from carbon steel and painted with a red-oxide primer to help prevent corrosion. The pipe clamps are fabricated from 304 stainless steel. They are designed to support a cold load of almost 3,000 lb./in. while operating in an area where temperatures are higher than ambient. There were a total of 173 assemblies fabricated for this project, 152 variable hangers, 3 constant spring supports, 6 ball joint rigid struts, and 12 rigid rod hangers. Special load tests were performed prior to shipping.

Have a look into our new Expansion Joint Course

August 1st, 2017 Comments off

Expansion Joint Application and Design Course:

This course covers how to provide flexibility in the piping system by employing expansion joints to accommodate thermal expansion and contraction of sections of pipes or ducts.
Learn more about the Expansion Joint Course and more

 

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy