Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
admin — The Pipe Supports Blog
Author Archive

Big Tons with W-Beams as Stilts

September 17th, 2012 Comments off

Stilts using W-Beams were added to these big ton variable assemblies in order to meet height requirements for an oil refinery in Port Arthur, TX. Entirely fabricated with carbon steel, these big tons measure 50 1/2″ – 70″ L x 18″ – 22″ W by 37″ H and are capable of supporting loads up to 113,734 lb with an upward travel range of .076″ – .816″. Permanent travel stops were later installed in order to prevent any chances of downward shift.

36 Custom Designed Pipe Saddles for a Power Plant

September 4th, 2012 Comments off

Thirty-six custom designed pipe saddles were created for a power plant in Mississippi. These 20″ W x 72″ L x 30″ H saddles were made with carbon steel with PTFE slide plates. These pipe saddles were designed to support a load of 55,000 lb. and will be applied to fluid bed duct supports.

Solution for Removing Travel Stops in Variable Cans with Heavy Loads

May 22nd, 2012 Comments off

For spring cans capable of 40,000 lb. or greater, we recommend you use jacking bolts to remove the travel stops. Visit our visual media section to learn the Solution for Removing Travel Stops at Heavy Loads.

Maintaining your PTFE Slide Plates

February 29th, 2012 Comments off

Slide plates are easy to maintain if you follow these certain steps when inspecting them. Visit our visual media section to learn what four steps to take for Slide Plate Inspection and Maintenance.

Our field service manager, David Baker, will show you what to look for when inspecting your PTFE slide plates. If you have any questions, feel free to call David Baker at 713-992-7048 or email us at info@pipingtech.com.

Four Steps to Inspecting Your Hydraulic Snubber

January 27th, 2012 Comments off

Do you have a hydraulic snubber would you like inspect, but don’t know where to begin? Visit our visual media section and learn How To Inspect a Hydraulic Snubber.

This video will go over the four main steps when inspecting a hydraulic snubber. If you have any questions, feel free to call us at 713-731-0030 or email us at info@pipingtech.com.

Take an Inside Look at Our Past 35 Years

November 21st, 2011 Comments off

We are happy to announce that the history section of our website has recently been updated! Four new chapters has been added to the PT&P History. Learn how PT&P got started, what obstacles we had to overcome, and how we are building towards the future. Visit the history section located on our website to read a condensed version of PT&P’s history or you can read our full history by ordering a free copy of Piping Technology & Products History: The First Thirty-Five Years.

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy