Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
Dan — The Pipe Supports Blog
Author Archive

New Website Countdown Begins Now! #PTPRelaunch

October 18th, 2017 Comments off

PT&P Represented at Hurricane Harvey Charity Poker Tournament

October 9th, 2017 Comments off

Piping Technology & Products was represented in the Flood Relief Poker Tournament hosted by World Series of Poker bracelet winner Gavin Smith. The tournament benefited two Houston area charities, one of Gavin Smith’s choosing and the other from the tournament winner. PT&P was the largest donor of the day, with a donation of $200. The event raised a total of $3,106, with $1,553 going to the Houston Pets Alive group and $1,553 to St. Luke’s.
 

PT&P playing poker for Hurricane Harvey Relief PT&P playing poker for Hurricane Harvey Relief
Categories: Piping Technology News Tags:

PT&P in the Community: Back To School

September 11th, 2017 Comments off

Piping Technology & Products joins the Houston Independent School District in giving back to the community.

 

PT&P’s Sizzling Summer: Supports, Services & Safety

August 8th, 2017 Comments off

Have a look into our new Expansion Joint Course

August 1st, 2017 Comments off

Expansion Joint Application and Design Course:

This course covers how to provide flexibility in the piping system by employing expansion joints to accommodate thermal expansion and contraction of sections of pipes or ducts.
Learn more about the Expansion Joint Course and more

 

It’s National Safety Month: Hear What Our Safety Team Has to Say

June 27th, 2017 Comments off

At PT&P, safety always comes first. It’s National Safety Month so we took some time to visit with our top, industry-rated Safety Department and find out first-hand from the experts how they help us all keep each other safe.

F-Type Variable Springs for a Refinery in Oklahoma

June 26th, 2017 Comments off

F-Type Variable Spring Cans for a refinery in Oklahoma

Type: Variable Spring Supports
Size: 70 7/8″ tall and 17 3/4″ wide
Material: Carbon Steel and PTFE Slide Plates
Design: 30,980 lb. load/2,083 lb. spring rate
Testing: 35,000 lb hydrotest

PT&P manufactured variable spring supports for a refinery in Oklahoma. These F-Type PTP-6 spring cans are 70 7/8″ tall and 17 3/4″ wide. They are completely fabricated from carbon steel with PTFE slide plates welded on the load flange and internal guide. They are designed for an operating load of 30,980 lb. .with a spring rate of 2,083 lb./in. and 0.49″ of movement. These variables were hydrotested with a load of 35,000 lb. prior to shipment.

3-Layer Cryogenic Pipe Shoes for a Light Hydrocarbon Chemical Plant in Texas

June 10th, 2017 Comments off

3-Layer Cryogenic Pipe Shoes for a Light Hydrocarbon Chemical Plant in Texas

Type: Pre-Insulated Pipe Supports for Cryogenic Temperatures
Size: 5.5″ of Insulation / Clamps are 12″ wide
Material: Polyurethane Foam and Carbon Steel with HDG Finish
Design: 18″ Pipe and Cryogenic Operating Temperatures
Testing: Standard Quality Control Tests

These 3-layer pre-insulated cryogenic pipe shoes were custom fabricated by Piping Technology& Products for a light hydrocarbon chemical plant in Texas. The insulation foam is made from polyurethane and the rest of the shoe components from carbon steel with HDG finish. The cold shoes are designed for 18″ pipe, the 3-layers of insulation total is 5.5″ thick, the clamps are 12″ wide, and cryogenic operating temperature. Standard quality control tests were performed prior to shipment.

Mechanical Snubbers for a Refinery in Oklahoma

May 5th, 2017 Comments off

Mechanical Snubbers for a Refinery in Oklahoma

Type: Mechanical Snubbers
Size: Size MSA-10, 36″ OAL, and 30 1/2″ Pin-To-Pin
Material: Carbon Steel with HDG Finish
Design: Operating load of 15,000 lbs and a 6″ Maximum Stroke
Testing: Standard Load Tests

Piping Technology & Products supplied these mechanical snubbers with two end brackets, fabricated from carbon steel with an HDG finish for a refinery in Oklahoma. They are size MSA-10, 36″ OAL, and 30 1/2″ pin-to-pin. The snubbers are designed for an operating load of 15,000 lbs and have a 6″ maximum stroke. Standard load tests were performed prior to shipment. Mechanical snubbers have two modes of operation. In passive mode, i.e., motion caused by thermal loads, the resisting mechanism is disengaged and the snubber “free wheels” with very low resistance. In active mode the mechanism is engaged, and the snubber limits the acceleration to a low threshold value.

PT&P Cryogenic Blanket Insulation Prototype Test

May 2nd, 2017 Comments off

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy