Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
Dan — The Pipe Supports Blog
Author Archive

How to Adjust the Load and Height of a Big Ton Spring Support

March 21st, 2016 Comments off

Product Overview (Video) Highlights of Products and PT&P Fabricators

February 8th, 2016 Comments off

Happy Holidays from Everyone Here at Piping Technology & Products, Inc.

December 22nd, 2015 Comments off

Custom Variable Spring Supports Designed for a Furnace Application in an Ammonia Plant

October 19th, 2015 Comments off

Custom Variable Spring Supports Designed for a Furnace Application in an Ammonia Plant

Custom Variable Spring Supports Designed for a Furnace Application in an Ammonia Plant.

PT&P custom designed variable spring supports and hangers for a furnace application in an ammonia plant. The furnace springs are fabricated from carbon steel and painted with a red-oxide primer to help prevent corrosion. The spring supports are designed to support loads ranging from 400 lb. to 12,500 lb. Over 150 spring coils underwent calibration test prior to fabrication and insertion into the variable support housing to ensure variance of less than 5%.

C-Type Variable Spring Supports Designed for a Power Plant

August 24th, 2015 Comments off

C-Type Variable Spring Supports Designed for a Power Plant

PT&P designed C-Type variable spring support assemblies for a power plant in Louisiana. They are designed for operating loads ranging from 1,319 to 2,800 lb. with an upwards travel ranging from 0.11" to 0.34". The variables were fabricated from carbon steel with a hot-dipped galvanized finish and standard load and travel testing was completed prior to shipment

16″ Dia. Insulated Pipe Supports Designed for a High Temperature Pipeline in Tennesse

July 27th, 2015 Comments off

PT&P/Pipe Shields, Inc. Manufactured Insulated Pipe Supports for a Pipeline in Tennessee

PT&P/Pipe Shields, Inc. manufactured insulated pipe supports designed for 12″-16″ diameter pipes in a high temperature application in Tennessee. They are fabricated from hot-dipped galvanized carbon steel and have 5-1/2” thick FireTemp® insulation. Standard Q.C. and dimensional tests were performed prior to an expedited shipment.

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy