Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
Ray — The Pipe Supports Blog
Author Archive

112 Variable Spring Supports for a Furnace Application

September 9th, 2013 Comments off

112 Variable Spring Supports for a Furnace Application

PT&P designed and fabricated 112 variable spring supports for a furnace application at an oil refinery in California. The spring cans are fabricated from carbon steel, vary from 36″ to 54″ in height and designed to operate at 400°F. The furnace cans are designed for operating loads ranging from 180 lb. to 1,400 lb. and movements from 1″ to 5″. The customer specified a custom paint system of two part iron oxide blue finish for the cans to comply with refinery conditions. Load tests were performed on the assemblies prior to shipment to determine the operating load and variability.

81 Pipe Shoes Designed for a Solar Power Plant in California

August 24th, 2013 Comments off

81 Pipe Shoes Designed for a Solar Power Plant in California

PT&P designed and manufactured eighty one custom pipe shoes for a solar power plant in California. The shoes will support heat transfer in fluid pipes at the facility. They consist of 3/8″ stainless steel slide plates and microtherm insulation. The shoes measure 10″ wide, 10″ height, and 18″ in length with a 750°F operating temperature. The assemblies have a vertical operating load of 10,000 lb. with 2″- 3″ of axial movement.

100-B Type Constant Spring Supports Designed with Double Transverse Lugs for a Refinery in Mexico

August 16th, 2013 Comments off

100-B Type Constant Spring Supports Designed with Double Transverse Lugs for a Refinery in Mexico

These 100-B Type vertical constant spring supports were designed with double transverse lugs for a refinery in Mexico. The constants were fabricated from A-36 carbon steel and they range in size from 23-1/4″ to 26-5/8″ in height, 50″ to 78″ in length and 18-3/8″ to 18-3/4″ in width. They are designed for operating loads ranging from 8,000 – 27,000 lb. and upward movements ranging from 3″ to 7″. The double transverse lugs allow the entire constant to swivel with the rod. Standard load and travel tests were performed prior to shipment.

F-Type and C-Type Variable Spring Supports for an Acid Plant in Canada

August 4th, 2013 Comments off

F-Type and C-Type Variable Spring Supports for an Acid Plant in Canada

PT&P designed and fabricated F-type and C-type variable spring supports for an acid plant in Canada. The variables range from 4″-8″ in diameter and can accommodate between .039″– 5.02″ in movement. They are designed for an operating temperature of 200°F and operating loads between 509 lb. and 13,489 lb. The variable springs are coated with a red oxide coating to protect against corrosion and underwent standard and load travel tests prior to shipment.

PT&P Partners with University of Houston’s College of Technology

July 25th, 2013 Comments off

July 25, 2013, Houston, TX – In an effort to expand our community presence and help students expand their education and interests, Piping Technology & Products is excited to announce our new partnership with the University of Houston’s College of Technology. As the goal of the UH College of Technology is to provide the highest quality education in fields such as mechanical engineering, construction management, and computer engineering, so is Piping Technology’s goal to help educate people interested in these fields as a public service to the community. As online courses become the norm for many colleges these days, PT&P realized this would be the perfect way to combine our thirty five years of manufacturing experience  with the UH College of Technology’s established reputation.

University of Houston - College of TechnologyThis new online course is titled “Piping Design & Analysis Influence on Pipe Support Selection andDesign”. The course covers the following topics: piping design and how it effects the overall configuration on preliminary piping design, initial layout, the total system, introduction to pipe stress analysis, detailed piping design, and how all of this influences pipe support and pipe hanger design. This is a self-paced course consisting of eight sections. The student will have four weeks to complete the eight sessions, which must be taken in sequential order. This is an online course only, with no classroom meetings required.

This course is approved for 8 PDH hours for Texas Professional Engineers.


To view the syllabus: http://www.pipingtech.com/news/PTP-Piping-Design-Course-Syllabus.pdf

The College of Technology at the University of Houston was established over seventy years ago and offers numerous fully accredited undergraduate courses and masters’ degrees through three departments: Engineering Technology, Human Development and Consumer Sciences, Information and Logistics Technology.

Piping Technology & Products, Inc. is headquartered in Houston, TX and began business in 1978. PT&P and its wholly owned subsidiaries (U.S. Bellows, Inc., Sweco Fab, Inc., Pipe Shields, Inc., and Fronek Anchor/Darling Enterprises, Inc.) offer a wide range of engineered products and services for various industries and applications.

 

NOTE: this course is not available at the moment. We are revising it to include a part II on expansion joints.

topics:Piping design the effects on overall configuration

42″ Dia. Stainless Steel Storage Tank

July 21st, 2013 Comments off

42" Dia. Stainless Steel Storage Tank
Sweco Fab. designed and fabricated storage tanks from 1/4″ thick ASTM A240 grade 304 stainless steel. The tanks are 42″ in diameter, 72″ in overall length and 39-7/8″ in height. The legs are fabricated from SA36 carbon steel. They are designed for 1 PSIG and ambient temperatures. The storage tanks were hydro tested and leak tested for 8 hours prior to shipment.

42″ Dia. Heavy Duty Insulated Pipe Support Anchors for a High Temperature Application

July 5th, 2013 Comments off

42" Dia. Heavy Duty Insulated Pipe Support Anchors for a High Temperature Application

PT&P designed and fabricated heavy duty insulated pipe support anchors for a high temperature application. The base, clamps, nuts, jackets and bolts are all fabricated from hot-dipped galvanized carbon steel. The hot shoes have 3″ thick high density calcium silicate insulation, and are designed for 12″-42″ diameter pipes. The dimensions are 47″ L X 51″ W X 16″ H. Standard Q.C. and dimensional tests were performed prior to an expedited shipment.

48″ Dia. High Pressure Knock-out Drum Vessel

June 29th, 2013 Comments off

48" Dia. High Pressure Knock-out Drum Vessel

48" Dia. High Pressure Knock-out Drum Vessel

Sweco Fab, designed and fabricated a high pressure knock-out drum for a refining company in El Paso, Texas. The pressure vessel was designed according to ASME Section VIII Div. 1 codes with an overall height of 351″ and inside drum diameter of 48″. Its main application is to separate the vapor and liquid in the refining process. It contains a fire proofing skirt and a stainless steel demister pad that aids the separation process. The shell is fabricated from 3/8″ thick SA516 Grade 70 carbon steel, and the forge fittings are fabricated from SA105 carbon steel. The knock out drum has an operation temperature of 450°F at 125 psig, and underwent radiography, dye penetrant and hydro-tests before it was shipped.

Cryogenic Insulated Pipe Supports Designed for a Natural Gas Refinery

June 23rd, 2013 Comments off

Cryogenic Insulated Pipe Supports Designed for a Natural Gas Refinery

Over 1200 cryogenic insulated pipe supports were designed for a natural gas refinery in Abu Dhabi. The supports range from 1″ to 30″ in diameter and have 30 lb. polyurethane foam (PUF) insulation. These cold shoes are comprised of a vapor barrier, an aluminum jacket and a carbon steel base. An ice test was performed on all the supports prior to shipment.

Custom Hold-Down Pipe Clamps Designed for a Natural Gas Facility

June 10th, 2013 Comments off

Custom Hold-Down Pipe Clamps Designed for a Natural Gas Facility

PT&P designed custom hold-down pipe clamps for pipe sizes ranging in diameters from 6″ to 14″ at a natural gas facility. The HD-3 is an arrestor type hold down used when there is very low thermal movement and these clamps are similar to them but differ due to their adjustable bases. These clamps are fabricated from galvanized carbon steel and include a neoprene lining to absorb vibration.

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy