Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
Ray — The Pipe Supports Blog
Author Archive

Stock Upthrust Constants Modified with an Auxillary Platform

January 16th, 2012 Comments off

200 U-Type Constant Spring Supports Designed for Large Spring Coils.

These 200 U-Type constant spring supports were modified to increase their installed height by adding a secondary plate and angles, which will be welded to the structural beam. The constants range in size from 25″ to 27″ in height, 52″ to 67″ in length, and 25″ in width. Their load capacities range from 10,300 lb. to 13,000 lb. with vertical movement ranging from 3″ to 4-1/2″. All constants were fabricated from A-36 carbon steel, and went through standard load and travel testing per MSS Standards prior to shipment.

Do you have a similar application that requires upthrust constants? Get pricing today!

request-a-quote

Happy New Years from the PT&P Team

January 3rd, 2012 Comments off

We're excited to Support you in 2012!

Happy New Years from the PT&P Team

PT&P Company Photograph

PTP-1 F-Type Variable Spring Assemblies

December 19th, 2011 Comments off

PTP-1 F-Type Variable Spring Assemblies

These PTP-1 F-Type variable spring assemblies fabricated from A-36 carbon steel, were custom designed to accommodate a height of 11-11/16″ while keeping the same spring rate. The F-Type variable is used to support the pipe from below and are typically mounted to concrete pads via anchor bolts or welded to structural steel. The variables are designed for loads up to 6,500 lb. and a total upward travel of 5/16″.

PTP-1 F-Type Variable Spring Assemblies

Want to learn more about variable springs? Check out a recording of a past live webinar.
access-our-webinar-archives

48″ Diameter Stainless Steel Glycol Makeup Tank Fabricated By Our Sweco Fab Division.

December 5th, 2011 Comments off

48" Diameter Stainless Steel Glycol Makeup Tank

This Glycol Makeup Tank is fabricated entirely from ASTM A240-304 stainless steel and is rated for 0 psig at 150°F. The tank has a 1,000 gallon capacity and measures 48″ I.D. x 10′-8″ seam-to-seam. The stand pictured behind is also fabricated from stainless steel and measures 11′ high. The customer ordered six additional units and all the Makeup Tanks underwent leak testing prior to shipment.

48" Diameter Stainless Steel Glycol Makeup Tank

Do you require a tank or vessel for an upcoming project? Let us price it for you today!

request-a-quote


Custom Instrument Supports Fabricated from Carbon Steel with a Hot Dipped Galvanize Finish

November 21st, 2011 Comments off

Custom Instrument Supports Fabricated from Hot Dipped Galvanized Carbon Steel

These custom instrument supports are fabricated from carbon steel with a hot dipped galvanize finish. The supports vary in heights up to 5′ and widths from 18″ to 24″. A total of 126 stands will be used to support instruments at an oil refinery. PT&P offers a complete line of adjustable and welded instrument supports in various mounting styles.

Custom Instrument Supports Fabricated from Hot Dipped Galvanized Carbon Steel

Do you see a need for instrument supports in a current or future  project of yours? Get pricing today! request-a-quote


Upcoming Webinar: Pipe Support and Expansion Joint Field Examples and Case Studies

November 17th, 2011 Comments off

The live Webinar is over, but you can still view the recording at www.pipingtech.com/webinar

Subject: Pipe Support and Expansion Joint Field Examples and Case Studies

** Webinar is worth 1 PDH Credit for TX Professional Engineers

Date: Thursday, December 8, 2011

In Field Constant SupportPT&P’s field service division is available 24×7 in the case of an emergency situation or for a scheduled shut down. In this Webinar we explore the details of actual case studies focusing on various signs that indicate if a particular support needs replaced or adjusted. The presentation also covers projects that brought on new standard designs and custom designs for specific applications. And lastly, it includes valuable additions and procedures that extend the typical life span of a pipe support.

Heavy Duty Yoke U-Bolt Pipe Clamps for a Continuous Catalyst Regeneration Plant

November 14th, 2011 No comments

Heavy Duty Yoke U-Bolt Pipe Clamps for a Continuous Catalyst Regeneration Plant

These custom heavy duty Fig. 43 yoke u-bolt pipe clamps are designed for manifold piping in a Continuous Catalyst Regeneration plant in Mexico. The yoke clamps are for a 36″ diameter pipe size and are fabricated from A240 Grade 316 stainless steel. They are designed to support a load of 33,731 lb. and temperatures up to 1100°F. PT&P supplied a total of 16 assemblies, comprised of yoke u-bolt clamps and E-type constant springs, for this project.

Do you need yoke u-bolt clamps or constants? We would be happy to provide you with a quote today. request-a-quote


Upcoming Webinar: Design, Application & Installation of Pipe Clamps

November 3rd, 2011 No comments

To view the recording, visit www.pipingtech.com/webinar

Subject: Design, Application & Installation of Pipe Clamps

** Webinar is worth 1 PDH Credit for TX Professional Engineers

Date: Thursday, November 17, 2011

 

Pipe ClampsThis presentation is on Pipe Clamps, including Hold-Down Clamps, Riser Clamps, Clevis Hangers, Yoke U-Bolt Clamps and Structural Supports. Learn how the appropriate type of pipe support is chosen based on the different design conditions. Find out how Finite Element Analysis is used in the design process and view the custom pipe supports designed for extreme applications. Finally, view the value-added services offered by PT&P and rest assure that your pipe clamp needs can be covered by our 24×7 web-based emergency services, field services and quick-turn around time when you need it most.

The featured presenter, Jerry Godina has over 13 years experience as a pipe support designer and manages PT&P’s engineer training development program. He also inspects existing supports, consults on site remediation projects and oversees installation on a regular basis.

 

Large Custom Sway Struts Designed for a Liquid Filters Manufacturer

October 31st, 2011 No comments

Custom Sway Strut Assemblies

These custom fig. 2110, size 8 sway struts are for a liquid filters manufacturer located in Mississippi. Both sway struts have a 128,000 lb. load capacity and are fabricated from carbon steel with a hot-dipped galvanized finish. The sway struts measure 68-5/8″ long and have a 4″ diameter rod size. A load test was performed prior to an expedited shipping schedule of 1-1/2 weeks.

Do you require custom supports that are not found in our catalog? No problem! Get pricing today.

request-a-quote


PTFE, 25% Glass Filled Slide Plates Bonded to Stainless Steel Backing Plates

October 17th, 2011 No comments

PTFE, 25% glass filled slide plates bonded to stainless steel backing plates

The slide plates are comprised of 1/4″ thick PTFE, 25% glass filled slide plates bonded to 1/8″ A240 grade 316 L stainless steel backing plates. Stainless steel was used for better resistance to corrosion and longevity. The assemblies measure 83″ long by 20″ wide and will be installed underneath a bridge. A total of 16 slide plates were fabricated and designed for a pressure of 500 psi at ambient temperature. PTFE, 25% glass filled material provides a low coefficient of friction, is easy to install, does not require surface treatments, or grouting, and is unaffected by weather conditions.

PTFE, 25% glass filled slide plates bonded to stainless steel backing plates

Would you like to learn more about slide plates? Check out a recording of our past slide plate webinar!
access-our-webinar-archives

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy