Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
Ray — The Pipe Supports Blog
Author Archive

February 2008 News

February 20th, 2008 No comments

PT&P’s Technical Information is Now Easier to Browse

Information on Products/Services:
Expansion Joints and Bellows
Fatigue Testing and FEA Analysis
Inspection and Maintenance
Vibration Controls
Engineered Pipe Supports
Slide Bearing Plates
Fabricated Pipe Shoes and Anchors
Organized by Product/Service Category
Simply Browse Cover Images
Click to View Printable PDF Version
Download for Adobe Acrobat Reader

View Technical Bulletins on our Site

24" Heavy Duty Cryogenic Pipe Supports

February 6th, 2008 No comments
24" Heavy Duty Cryogenic Pipe Supports

24" Heavy Duty Cryogenic Pipe Supports

24" Heavy Duty Cryogenic Pipe Supports

24" Heavy Duty Cryogenic Pipe Supports

These pipe supports were designed for a petrochemical plant in Puerto Rico. The nominal pipe size of the supports ranges between 16″ and 24″. The cryogenic supports are fabricated from carbon steel and include a stainless steel jacket. They are insulated with polyurethane foam and are designed for temperatures between -270ºF and 85ºF. The load capacity ranges between 5,000 lb. and 11,900 lb.

Want to learn more about cryogenic pipe supports? Instantly view a past webinar!

access-our-webinar-archives

18″ Split T Pipe Shoes to Support a Piping System for an Oil Refinery in Texas

January 2nd, 2008 No comments

18" Split T Pipe Shoes to Support a Piping System for an Oil Refinery

18" Split T Pipe Shoes to Support a Piping System for an Oil Refinery

18" Split T Pipe Shoes to Support a Piping System for an Oil Refinery in Texas

Split T Pipe Shoe

These split T pipe shoes are fabricated from three types of steel including carbon steel, alloy steel, and stainless steel. They are painted with a two coat paint system that involves masking off the metal on the upper portion of the shoe to allow for welding in the field. The pipe shoes are 18″ in length and 4″ in height.

Do you see a need for pipe shoes in your piping system? Get pricing today!
request-a-quote

Transition Piece for an Ammonia Plant

December 12th, 2007 No comments

 

Transition Piece for an Ammonia Plant

Transition Piece for an Ammonia Plant

Transition Piece for an Ammonia Plant

Transition Piece for an Ammonia Plant

SWECO Fab, Inc. designed and fabricated this transition piece for an ammonia plant in Egypt. The bottom rectangular flange measures 159″ long and 60″ wide. The top duct assembly has an outside diameter of 90″. The entire assembly measures 48″ high. The transition piece is fabricated from ASTM A516-70 carbon steel. It is used to connect a circular duct to a rectangular duct.

Want to learn more about the miscellaneous products we fabricate? Watch a Sweco webinar today!


access-our-webinar-archives



60" Adjustable Pipe Stands for an LNG Plant

November 7th, 2007 No comments

 

60" Adjustable Pipe Stands for an LNG Plant

60" Adjustable Pipe Stands for an LNG Plant

The stands were completed with a hot-dipped galvanize finish. They were also designed with a neoprene lining in the saddle to prevent metal to metal contact in the field. The function of the pipe stand is to allow for adjustment of the support after expansion or contraction of the pipeline. The simplicity of the design allows for easy installation and maintenance of the support.

Do you see a need for adjustable pipe stands in your current or upcoming project? Get pricing today!
request-a-quote


October 2007 News

October 15th, 2007 No comments

PT&P is Now ISO 9001:2000 Certified (October 13, 2007) Piping Technology & Products, Inc. is awarded the ISO 9001:2000 certificate by DNV Certification, a division of Det Norske Veritas (DNV), for the Manufacture of Hot and Cold Pipe Supports. This certificate proves that PT&P’s Quality Management System has been certified against the best practice standard and is compliant.

View Benefits of ISO 9001:2000

View ISO 9001:2000 Certificate

ISO 9001;2000

ISO 9001:2000

The latest version of standards, ISO 9001:2000 is created by the International Organization for Standardization (ISO), who set international requirements for Quality Management Systems. By conforming to the Quality Management System, Piping Technology & Products, Inc. demonstrates predictability of internal operations and the ability to meet customer requirements. While becoming certified, a company can identify the areas that are most critical to operations through management system audits. Once problem areas are identified, measured, managed and improved, customer satisfaction will rise, staff responsibility and motivation will also experience growth.

26" Hot Water Expansion Tank for a Compressor Station

September 26th, 2007 No comments

 

 

26" Hot Water Expansion Tank for a Compressor Station

26" Hot Water Expansion Tank for a Compressor Station

26" Hot Water Expansion Tank for a Compressor Station

26″ Hot Water Expansion Tank for a Compressor Station

26″ Hot Water Expansion Tank

– Material: .25″ Thick Carbon Steel
– Design Pressure: 50 PSIG
– Design Temperature: 200 F
– Capacity: 170 Gallons

Do you require a vessel or tank for your current or upcoming job? Get pricing today!
request-a-quote


Categories: Pressure Vessels/Tanks Tags: ,

43" Angulating Constants for a Power Plant

August 29th, 2007 No comments
43" Angulating Constants for a Power Plant in Utah

43" Angulating Constants for a Power Plant in Utah

The design of this constant requires that it be connected by pins from the top and from the bottom to allow it to angulate. The constant assemblies are fabricated from A36 carbon steel. The constants measure between 23″ and 43″ in length with a take-off between 29″ and 55″. The load range is 60 lb. to 2,605 lb. and each constant assembly underwent standard load and travel testing.

Do you see a need for constants in your plant or refinery? Get pricing today!
request-a-quote


Spider Guides for a Heat Recovery Steam Generation Plant

July 25th, 2007 No comments

 

Spider Guides for a Heat Recovery Steam Generation Plant

Spider Guides for a Heat Recovery Steam Generation Plant

Spider Guides for a Heat Recovery Steam Generation Plant

Spider Guides

Components of these Cylinder Pipe Guides (a.k.a. Spider Guides) include carbon steel plates, stock clamps, angles, and hot-dipped galvanized pipes. The Guides range in pipe size from 6″ to 16″. The maximum design temperature for the Spider Guides is 750ºF.

They are designed to control lateral pipe movement and maintain the alignment of the piping through its axial and contraction cycles. A single piping run uses multiple Spider Guides to avoid a fulcrum or an imposed lateral deflection on critical components.

Want to learn more about spider guides? Instantly view a webinar on spider guides!




access-our-webinar-archives



97" Diameter, 3-Piece Pipe Clamps for a Refinery in Ponca City

July 18th, 2007 No comments
97" Diameter, 3-Piece Pipe Clamps for a Refinery in Ponca City

97" Diameter, 3-Piece Pipe Clamps for a Refinery in Ponca City

Piping Technology & Products, Inc. fabricated 3-piece pipe clamps used to support 97″ diameter stainless steel duct work. This duct work is being added to a refinery for an expansion project in Ponca City, Oklahoma. Each section of the clamp assembly is formed from a continuous plate and gussets are added at each of the bolt locations for increased strength and rigidity. Due to the ducts having a relatively thin wall, these clamps are designed wider than necessary in an effort to reduce localized stresses on the duct work. The lower section of each clamp is formed to create a 150° cradle. This acts as a cradle by supporting the duct without inducing extra pressure, which might cause the duct wall to buckle or bend.

The upper sections are formed from 1/2″ thick by 12″ wide bar stock, whereas the lower sections are formed from 1/2″ thick by 18″ wide. All three sections are rolled to an inner radius of 48 1/2″ and the welded gusset plates are all 1/2″ thick. The upper sections are formed at 105° each, and the upper load bolt is 2″ in diameter while the six clamping bolts are 1 1/2″ in diameter.

The maximum load to be carried by these pipe clamps is 16,888 lb. Each pipe clamp will be used in conjunction with a variable spring support to accommodate movements as high as 2 1/4″.

Do you require 3-piece pipe clamps for your plant or refinery? Get pricing now!
request-a-quote


Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy