Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
Ray — The Pipe Supports Blog
Author Archive

Injection-Molded Anchors for an LNG Plant

June 27th, 2007 No comments
Injection-Molded Anchors for an LNG Plant

Injection-Molded Anchors for an LNG Plant

Injection-Molded Anchors for an LNG Plant

6" NPS Anchors

These supports are used in a re-gasification terminal and are designed for -29°C ambient and -196°C fluid temperatures. The polyurethane foam insulation is injected into a mold with a pipe spool in place to ensure maximum fit. The pipe anchors are made from 516 Grade 70-N carbon steel. These supports were put through Finite Element Analysis and inspected by our Quality Control Department.

Want to learn more about pre-insulated supports? View a pre-insulated support webinar today!


access-our-webinar-archives



42" Large Bore Pipe Saddles

June 13th, 2007 No comments
42" Large Bore Pipe Saddles

42" Large Bore Pipe Saddles

42" Large Bore Pipe Saddles

42" Large Bore Pipe Saddles

42" Large Bore Pipe Saddles

42" Large Bore Pipe Saddles

PT&P fabricated 42″ diameter large bore pipe saddles. All pipe saddles are designed to be used on flare lines for a crude expansion project. They are fabricated from A-36 carbon steel and hot dipped galvanized. Sizes range from 16″ – 48″ in diameter and 6″ – 15″ in height.

Do you require large bore pipe saddles in your current project? Get pricing today!
request-a-quote


Cold Insulated Pipe Anchors for an LNG Plant

June 6th, 2007 No comments
Cold Insulated Pipe Anchors for an LNG Plant

Cold Insulated Pipe Anchors for an LNG Plant

Cold Insulated Pipe Anchors for an LNG Plant

Base Stop

Piping Technology & Products designed and fabricated 36″ diameter insulated pipe anchors that included base stops to prevent lateral and axial movement of the anchor.

The design of the insulated stop plates allows the anchor to withstand 63,000 lbs of axial load. The use of Polyurethane insulation allows for operating temperatures down to -300°F.

Do you require insulated pipe anchors for your piping system? Get pricing today!
request-a-quote


Lateral Joints for the Chemical Process Industry

May 23rd, 2007 No comments

 

Lateral Joints for the Chemical Process Industry

Lateral Joints for the Chemical Process Industry

Lateral joints are machined from a forged piece of stainless steel, and are used as flow diversion on pipe lines for the chemical process industry.

Design:
Pressure = 960 PSIG
Test Pressure = 1440 PSIG
Temperature = 302ºF

Sizes:
1 1/2′ x 3/4′
3′ x 2′
4′ x 3′

Do you see a need for lateral joints in your piping system? Get a price quote today!
request-a-quote


Adjustable Pipe Stands to Support Ductile Iron Pipe

May 2nd, 2007 No comments

 

Adjustable Pipe Stands to Support Ductile Iron Pipe

Adjustable Pipe Stands to Support Ductile Iron Pipe

Piping Technology & Products, Inc. designed and fabricated adjustable pipe stands to support ductile iron pipe. Due to ductile iron pipes having non-standard diameters, each of the supports were custom fabricated per the customers’ requirements regarding pipe diameter and elevation. All the supports were fabricated from carbon steel with an HDG finish and designed to provide nine inches (+/- 4.50″) of adjustment and each support has an 11″ x 11″ base plate.

(Left) Cradle type supports are designed with an installed height of 84″ from the base to the bottom of pipe (BOP).

(Middle) Flange type supports are designed with an installed height of 81-1/4″ from the base to the BOP.

(Right) Tee type supports are designed for an installed height of 77″ from base to BOP.

They will be used on horizontal piping and will be attached at their base to pre-case concrete pedestals. Each base plate has been pre-drilled to accept anchor bolts provided at the site. The pipe stand’s threaded adjustment column will allow field personnel to adjust the height of each support. They can also accurately place the pipe at the required elevation without using shims or modifying the concrete pedestal.

Do you see a need for adjustable pipe stands in your piping system? Get pricing today!
request-a-quote


PTFE, 25% Glass Filled, Slide Plates for a LNG Plant in Trinidad

March 14th, 2007 No comments

 

PTFE, 25% Glass Filled, Slide Plates for a LNG Plant in Trinidad

PTFE, 25% Glass Filled, Slide Plates for a LNG Plant in Trinidad

 

PTFE, 25% Glass Filled, Slide Plates for a LNG Plant in Trinidad

PTFE, 25% Glass Filled, Slide Plates for a LNG Plant in Trinidad

PTFE, 25% Glass Filled, Slide Plates for a LNG Plant in Trinidad

PTFE, 25% Glass Filled, Slide Plates for a LNG Plant in Trinidad

Piping Technology & Products, Inc. designed and manufactured PTFE, 25% glass filled, slide plates for cable trays located on a floating structure. The slide plates are used to reduce the friction between the cable trays and the structural steel it is resting on. These particular slide plates are bonded to stainless steel backing plates that are bolted to the structure.

Want to learn more about slide plates? Instantly view a slide plate webinar today!


access-our-webinar-archives



Trunnion Base ELL Supports for a Cryogenic Line

February 21st, 2007 No comments
Trunnion Base ELL Supports for a Cryogenic Line

Trunnion Base ELL Supports for a Cryogenic Line

 

Trunnion Base ELL Supports for a Cryogenic Line

Trunnion Base ELL Supports

Cryogenic Trunnion Base ELL Supports
– Designed for temperatures of -300°F
– Insulated supports are for an LNG receiving, storage and regasification terminal

Do you have a requirement for Trunnion Base ELL supports? Let us price them for you!
request-a-quote


58" Floating Rings for a Process Plant

January 31st, 2007 No comments
58 Floating Rings for a Process Plant

58 Floating Rings for a Process Plant

58" Floating Rings for High Temperatures of up to 1200°F for a Polypropylene Plant

Floating Ring in the Field

58" Floating Rings for High Temperatures of up to 1200°F for a Polypropylene Plant

58" Floating Ring Being Installed

58" Floating Rings for High Temperatures of up to 1200°F for a Polypropylene Plant

Floating Ring in the Field

58″ Floating Rings
– Sizes Range from 19″ I.D. to 91 1/2″ I.D.
– ASTM A-240 Grade 316H Stainless Steel
– 100% Dye Penetrant Tested on all Weld Seams

Do you have a requirement for floating rings in your piping system? Get pricing today!
request-a-quote


Categories: ASME/Miscellaneous Fabrication Tags:

Upthrust U-Type Constant for an Energy Plant

January 3rd, 2007 No comments
Upthrust U-Type Constant for an Energy Plant

Upthrust U-Type Constant for an Energy Plant

Piping Technology & Products, Inc. Designed and Fabricated a Upthrust U-Type Constant for an Energy Plant in California

– Designed for a constant load of 7,733 lb.
– Travel ability is from 0 to 9 inches of total travel
– The constant’s shipping and installation setup is for downward travel
– The constant spring support has been custom designed to reduce its take-off from 36 7/8″ to 29 1/2″

Do you have a need for u-type constants in your plant? Get pricing today!
request-a-quote


24" Pipe Shoe with Clamps

December 20th, 2006 No comments

 

24" Pipe Shoe with Clamps

24" Pipe Shoe with Clamps

This particular 24″ pipe shoe was specially designed and fabricated during a planned plant outage. Instead of the normal delivery time of 3-4 weeks, Piping Technology & Products, Inc. finished this project in just one week. This pipe shoe with clamps was designed for 12,900 lb. vertical and 3,000 lb. lateral load. This 1″ thick carbon steel pipe shoe was designed to handle 650°F and has a PTFE, 25% glass filled, slide plate installed to allow for axial movement.

Do you require pipe shoes with clamps like those described above? Get pricing today!
request-a-quote


Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy