Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
Ray — The Pipe Supports Blog
Author Archive

November 2003 News

November 4th, 2003 No comments

Adjustable & Welded Instrument Components

Instrument Supports

Instrument Supports

Instrument Supports

Cable Mount

Piping Technology & Products, Inc. offers a complete line of adjustable and welded instrument supports in various mounting styles. Our instrument supports may be used independently or with secondary components to construct a custom support system. please refer to our catalog for details and ordering information.

Instrument Supports

U-bolt Mount

instrument support

Floor Mount

Do you require instrument components in your current or future job? Get pricing today!

request-a-quote


42” Hold Down with Wedge Support

October 3rd, 2003 No comments

 

42” Hold Down with Wedge Support

42” Hold Down with Wedge Support

PT&P designed and fabricated a Hold Down with wedge support for a 42” pipe. The entire assembly is PTFE, 25% glass filled, bonded and will be used to control and reduce pipe vibration at an LNG plant. Both the Hold Down and wedge support are made from A36 Carbon Steel and a fabric pad which is exceptionally suited for vibration impact and declination.

Want to learn more about hold down clamps? View a past pipe clamp webinar now!



access-our-webinar-archives



950 lb. load C-type Constants

September 26th, 2003 No comments
950 lb. load C-type Constants

950 lb. load C-type Constants

PT&P recently designed and manufactured sixteen PTP-200 C-type constants modified to fit in constricted areas near a furnace of a chemical facility.  These constants are designed to travel from 5 1/2” to 19” and are specified to carry loads ranging from 245 to 924 lbs. They were fabricated from A36 plates with 4140 pins. Due to the proximity of the pipes and other equipment, the front part of the constant frame was cut to allow the pipe to move freely. Load and travel testing was performed to ensure quality and precise performance.

Want to learn more about constant springs? Instantly view a past constant webinar!



access-our-webinar-archives



2,650 lb. load C-Type Constants

September 26th, 2003 No comments
2,650 lb. load C-Type Constants

2,650 lb. load C-Type Constants

Piping Technology and Products, Inc. recently fabricated 22 Carbon Steel PTP 200-C type Horizontal & PTP 100-C type Vertical Constants with sizes from 3 to 27.  The load capacity of the constants spans between 215 to 2650 lbs., with a travel ranging from 1” to 4”.  The three bolt clamps are fabricated from stainless steel material A 240 Gr. 304 for 4″ to 8″ dia. pipes.  The rod and turnbuckle were shortened on two of the constants in order to accommodate situations of small rod take out. Standard load and adjustment testing was performed.

Want to learn more about constants? Instantly view a past constant webinar today!


access-our-webinar-archives



Cryogenic Supports with Permali® Block

September 16th, 2003 No comments
Cryogenic Supports with Permali® Block

Cryogenic Supports with Permali® Block

The above design shows cryogenic supports with Permali® block. Permali® block is a laminated phenolic material from layers of wood impregnated under vacuum and heat with synthetic resin. These pipe shoes can be designed to restrain very high axial, lateral and vertical loads. These shoes are used for LNG pipeline sliding supports with TEF slide plates.

Do you require cryogenic pipe supports for a current or future project? Get pricing today!


request-a-quote


61" x 61" Graphite Slide Plates for a Refinery Project in India

August 29th, 2003 No comments

61" x 61" Graphite Slide Plates for a Refinery Project in India

61" x 61" Graphite Slide Plates for a Refinery Project in India

PT&P designed and fabricated eighteen graphite slide plates for a refinery project in India. These plates are made of graphite sheets with thicknesses of 6mm and 12mm. The overall dimensions of the plates are 3/8″ x 19-11/16″ x 19-11/16″ and 3/8″ x 61″ x 61″. The plates will be tack welded on top of big ton spring supports in the refinery to minimize frictional effects.

Do you see a need for slide plates in your piping system? Let us price them for you today!


request-a-quote


Categories: Slide Plates Tags: ,

20,500 lb Riser Clamps for a Power Plant

August 22nd, 2003 No comments
20,500 lb Riser Clamps for a Power Plant

20,500 lb Riser Clamps for a Power Plant

PT&P recently fabricated 22 Fig. 190 Type 3 riser clamps for suspending the vertical runs of pipe at the central power plant in Puerto Rico.  The clamps are designed for 17″ and 24” pipes and have an overall length of 71″ and 87” respectively. Both designs have a bar stock size of 1.75″x10″ and load bolts of 2.75″ diameter. Utilizing gusset plates at the clamp’s bend radius allowed for the smallest, yet sufficient clamp stock size for the specified loads. The smaller clamp has an operating capacity of 14,000 lbs while the larger operates at 20,500 lbs. Chrome-Moy 387 Grade 22 bar stock was used with A193 Grade B7 bolting to accommodate high temperature operating conditions.

Do you see a need for riser clamps in your current or future project? Get pricing now!


request-a-quote


Spray Nozzle Assemblies for a Special Pressure Application

August 15th, 2003 No comments

Spray Nozzle Assemblies for a Special Pressure Application

Spray Nozzle Assemblies for a Special Pressure Application

Sweco Fab. Inc. recently manufactured 16 injection spray nozzle assemblies from INCO 625 material for a specific pressure application.   Each nozzle is made up of a 1½ S/160 pipe. The quill construction is clog proof and utilizes the turbulence created by its unique design to achieve distribution of the injected liquid into the product flow.

Do you require spray nozzle assemblies as described above? Get pricing today!


request-a-quote


8,500 lb. Load Clamp Support Assembly

August 8th, 2003 No comments
8,500 lb. Load Clamp Support Assembly

8,500 lb. Load Clamp Support Assembly

8,500 lb. Load Clamp Support Assembly

Clamp and Variable Spring Assembly

PT&P recently designed and manufactured a support assembly with two PTP-2 Type C spring hangers and a special clamp support. The springs are designed for an 8,500 lb load and a maximum travel of 1″. The entire pipe hanger assembly, with a net weight of 860 lbs, was fabricated from Carbon Steel and A-387 GR. 22 Chrome. The springs were calibrated to determine the exact spring rate prior to adjusting to customer specifications.

Want to learn more about pipe clamps? Instantly view a past pipe clamp webinar now!



access-our-webinar-archives



Custom Carbon Steel Anchors and Shoes

July 25th, 2003 No comments
Custom Carbon Steel Anchors and Shoes

Custom Carbon Steel Anchors and Shoes

Piping Technology and Products, Inc. fabricated 4702 carbon steel shoes for various pipe sizes ranging from 2” to 10”. As per customer request, the shoes are designed to accommodate 30 PSI compressive strength. A three-coat paint system was applied for corrosion protection. All supports were liquid dye-penetrant tested at 5% of welds.

Custom Carbon Steel Anchors and Shoes

Anchors & Shoes on Shipping Floor

Do you need custom pipe anchors for your current or future project? Let us price them for you today!
request-a-quote


Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy