The ladders and platforms were designed to be installed on a 90′ tall pressure vessel. The ladders were fabricated from carbon steel and ranged in size from 5′ to 38′ in length. The vessel platforms were also fabricated from carbon steel and measure up to 16′-6″ in diameter.

Do you require ladders or platforms for a vessel or tank? Let us serve your needs today!

Register for our free Webinar presentation on ASME Vessels, Pig Launchers, Strainers and More from Sweco Fab, Inc. (May 19, 2011)

This Webinar is over, to view past Webinar recordings, visit http://www.pipingtech.com/news/webinars/index.htm

Air Receiver Tank

Attend a live Webinar introducing Sweco, Fab. Inc., the ASME design and fabrication division of PT&P. Learn how we design these components for high temperature, high pressure, and/or corrosive environments. Discover the different materials used based on a variety of applications. View some of the very unique and intricate Sweco custom designs, and corresponding technical drawings. Sweco designs and manufactures Pressure Vessels and Tanks, Pig Launchers and Receivers, Duct Work, Transition Pieces, Bellmouth Reducers, Spectacle and Line Blinds, Air Intake Stacks and Dampers, Conical Strainers, Instrument Stands and other custom fabricated products.

We look forward to having you join us for this complimentary presentation.

The featured presenter, Jerry Godina has over 13 years experience as a pipe support designer and manages PT&P’s engineer training development program. He also inspects existing supports, consults on site remediation projects and oversees installation on a regular basis.

Submarine Drum Vessel

Do you have an upcoming requirement for a tank or ASME vessel? Get pricing today!

20 vessel supports ranging in length from 30″ to 84″ were manufactured for an oil refinery in Texas. The structural supports will be attached to existing vessels to assist in supporting the nearby pipes and piping system. The supports were fabricated from carbon steel and coated with a hot-dipped galvanize finish to prevent corrosion.

Need to replace or add extra support to your piping system? Let us price it today!

This high pressure knock-out drum has a 2.5″ thick shell fabricated from ASTM SA516 Grade 70, and a SA105 and SA350 carbon steel flange. The drum has a 48″ diameter, a total length of 15’8″ and weighs over 23,000 lb. It underwent a hydro-test and design test per ASME section VIII-1 “U” stamp vessel prior to shipment.

Do you require a vessel or knock-out drum for your project? Get pricing today!

643 Instrument Stands

PT&P manufactured instrument stands from hot dipped galvanized carbon steel. The instrument stands are 52″ in height and have varying widths from 1 to 4′. They will be used to support instruments in a new Coker unit that is part of an oil refinery in Illinois.

Need some instrument stands to support the instruments in your plant? Get pricing now!

Instrument Stands for a Heavy Oil Refinery

PT&P manufactured 55 instrument stands from carbon steel with a hot-dipped galvanize finish. They are 75″ tall and 90″ wide, and will support various instruments and junction boxes in a heavy oil refinery.

Want to learn more about instruments stands? Watch a instant webinar on our miscellaneous fabricated products!

4″ to 14″ Diameter Spectacle Blinds for Process Piping

4″ to 14″ Diameter Spectacle Blinds for Process Piping

Sweco Fab, Inc., a division of PT&P, fabricated a variety of six spectacle blinds that will be used for selective line isolation. The spectacle blinds are fabricated from A516-70 carbon steel with sizes ranging from 4″ to 14″ diameter and per ASME B16.48 code. The function of a spectacle blind is to allow a line to be in either full shut-off mode or full flow mode, depending on which side is being utilized. Spectacle blinds are a lower cost alternative to double block and bleed valves where OSHA requires positive isolation of piping segments for safety reasons.

Want to learn more about spectacle blinds? View a webinar about Sweco Fab today!

Flue Gas Duct Damper

This damper was fabricated from a combination of 304 stainless steel and Inconel®. It is designed as a shut-off damper to control the flow of flue gas in an ammonia plant. The damper will be connected to a motor-driven control system by the linkage shown in the picture. The overall dimensions are 10′ x 6′ with a weight of 2,200 lb. It was painted with standard inorganic zinc primer and top coat per customer specifications. The damper went through visual inspection, dye-penetrant, and functional testing before being shipped to the customer. Refractory lining, utilized to withstand the high temperatures, will be added during installation.

Do you have an application that requires a damper? Get pricing today!

Exhaust Manifold that will be used with an Electric Generating System

This engine exhaust duct spool is fabricated from carbon steel and coated with specialized paint that is capable of resisting temperatures up to 1,000ºF. It measures 6′ long and connects two exhaust manifolds of 18″ in diameter to a bottom flange of 50″ in diameter. This engine exhaust duct spool will be covered with insulation and will be used to direct engine exhaust in a gas storage facility.

Want to learn more about our miscellaneous fabricated products? Watch a past webinar!