Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
ASME/Miscellaneous Fabrication — The Pipe Supports Blog

58 Large Diameter Floating Rings for a Refinery in Saudi Arabia

April 4th, 2003 No comments

58 Large Diameter Floating Rings for a Refinery in Saudi Arabia

58 Large Diameter Floating Rings for a Refinery in Saudi Arabia

58 Large Diameter Floating Rings for a Refinery in Saudi Arabia

Welding a Large Diameter Floating Ring

58 Large Diameter Floating Rings for a Refinery in Saudi Arabia

58 Large Diameter Floating Rings

Sweco Fab, Inc. recently designed and fabricated 58 floating rings for a Refinery in Saudi Arabia. Ranging from 40″- 155″ in diameter and 12″- 18″ in height, these rings weigh more than 1,500 lbs. each and are made from SA240-316H stainless steel plate with thickness of 1/2″ – 1 1/2″. All rings are fabricated by Full Penetration Weld and examined by dye penetration test.

Do you require floating rings for your current or future project? Let us price them for you today!
request-a-quote


6′ x 13 ½’ Steel Pipe Support Structure

December 20th, 2002 No comments
6' x 13 ½' Steel Pipe Support Structure

6' x 13 ½' Steel Pipe Support Structure

This 6′ x 13 ½’ pipe support structure is made of carbon steel and also includes beams, plates, and angles. Several of these structures were made for sites in Texas that convert landfill gas to energy.

Do you see the need for steel pipe support structures in your piping system? Get pricing now!


request-a-quote


Sludge Tank Vent Ducts

August 16th, 2002 No comments
Sludge Tank Vent Ducts

Sludge Tank Vent Ducts

Sweco Fab, Inc. recently designed and manufactured sludge tank vent ducts for a development project in Chad, Africa.

Due to the thin wall and height of the cylinder shell it was required to add a stiffing ring between the cylinder shell and flange. Each duct was 12 ¼” I.D. x 104 7/8″ high and weighed approximately 96 pounds. They were painted inside and out per System 6E grey color.

Learn more about Sweco Fab, Inc. and it’s products by visiting our webinar archives today!



access-our-webinar-archives



20" Stainless Steel Suction Strainer

March 22nd, 2002 No comments
20" Stainless Steel Suction Strainer

20" Stainless Steel Suction Strainer

Sweco Fab, the ASME fabrication shop of Piping Technology & Products, Inc., specially designed and manufactured two 20″ OD x 36″ long, suction strainers for a chemical plant in Louisiana.

The strainers, which were fabricated from SS32, each weigh 1,300 pounds. They were designed at 300 psig and 600° F and built to ASME code. In order to insure quality of the welds, PT&P’s Q.C. inspectors 100% x-ray tested butt welds of longitudinal seams and circumference seams, head to shell. Other pressure containment welds were dye penetrant examined. The unit, as a whole, was hydrotested at 390 PSIG.

Learn more about other Sweco Fab Inc. products in our webinar archives.



access-our-webinar-archives



1,000 Standard Pipe Supports for Corrosive Environment

March 8th, 2002 No comments
1,000 Standard Pipe Supports for Corrosive Environment

1,000 Standard Pipe Supports for Corrosive Environment

Piping Technology & Products, Inc., designed and fabricated over 1,000 standard pipe supports for a chemical agent disposal facility. These supports are to be used in a corrosive environment, therefore a unique, off white coating known as chemical resistant epoxy was used to cover the carbon steel, structural members.

The hardware was hot dipped galvanized, but in some cases, the u-bolts were coated with neoprene. Frames, guides, cantilever and axial stop supports comprised of the bulk of the material, however other support assembly components included rod hangers, clamped shoes and riser clamps.

Need pipe supports for your company? Get a pricing today!

request-a-quote


Stainless Steel Stanchions for a Power Company

February 1st, 2002 No comments
Stainless Steel Stanchions for a Power Company

Stainless Steel Stanchions for a Power Company

Piping Technology & Products, Inc. provided 35 stainless steel stanchions for pipe sizes 4 to 18 inches for a power company in Alabama.

The ends of the stanchions have shop-cut end connections that will allow field welding without any modifications by site personnel. Some stanchions were provided with straight pipe connections and others were provided with elbow connections. The minimum height requirement provided for a centerline height equal to approximately 16″ while the maximum pipe centerline was required to be at approximately 58 ½”. The stanchions were designed at 1100°F and sustained a maximum design load of 18,000 pounds. The stanchion base plates are 304 stainless steel and the tubes are constructed of A240 GR.304 seamless pipe.

Do you need stanchions for your company? Request a quote and get a response within 48 hours!

request-a-quote


ASME Catalyst Storage Bins

May 11th, 2001 No comments
ASME Catalyst Storage Bins

ASME Catalyst Storage Bins

Sweco Fab, Inc., the ASME code fabrication shop of Piping Technology & Products, Inc., designed and built eleven Catalyst storage bins for a large chemical company in Geismer, Louisiana. The catalyst storage bins were fabricated from 304 stainless steel and designed for 6 psig @ 300oF.

Want to learn more about various products of Sweco Fab, Inc. Visit out website webinars today!




access-our-webinar-archives



Galvanized Knee Braces

July 5th, 2000 No comments
Galvanized Knee Braces

Galvanized Knee Braces

The picture above is of galvanized knee braces. Piping Technology & Products, Inc. can meet most any fabrication requirement requested in any industry, i.e. refineries, chemical plants, power plants, etc.

In need of knee braces? Let us price them for you today!

request-a-quote


Jack Stand

June 8th, 2000 No comments
Jack Stand

Jack Stand

The photograph above shows unique jack stands designed to support stainless steel pipe. The top, which connects to the pipe at elbows, is fabricated from stainless steel. The bottom, which can be used to adjust the height, is fabricated from carbon steel and the galvanized. The two dissimilar materials are separated by a polyurethane[pdf] isolation block which is painted for protection.

Want to learn more about the other types of products we have? Visit our webinar archives today!



access-our-webinar-archives



Pipeline of the Future Museum Exhibit

April 5th, 2000 No comments
Pipeline of the Future Museum Exhibit

Pipeline of the Future Museum Exhibit

The photograph above shows the entrance of the “Pipeline 2000” exhibit at Houston’s Museum of Natural Science

This part of the exhibit was fabricated by SWECO Fab, Inc. a division of Piping Technology & Products, Inc. of Houston, Texas.

Categories: ASME/Miscellaneous Fabrication Tags:

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy