Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
Engineered Spring Supports — The Pipe Supports Blog

Variable Springs in a Variety of Sizes

October 29th, 1993 No comments
Variable Springs in a Variety of Sizes

Variable Springs in a Variety of Sizes

The two pictures above show a variety of spring supports for piping projects. At the top left is a row of spring hanger variables ready to form assemblies with rods, clamps and other hardware. Piping Technology & Products, Inc. manufactures all types of pipe supports and provides complete assemblies packaged and tagged to customer specifications for easy identification by the field crews who install them in power plants, petrochemical plants and paper mills. On the pallet at the top right and scattered through the lower picture are several Type F (base type) variable supports. Special features such as travel stops and the wide range of load and travel requirements result in a large variety of items built to satisfy particular customer requirements.

Are you in need of spring supports? Let us price one for you!

request-a-quote


30,000 lb. Load Type F Variable Spring Hangers

August 14th, 1993 No comments
30,000 lb. Load Type F Variable Spring Hangers

30,000 lb. Load Type F Variable Spring Hangers

Pictured above are special Type F variable springs being prepared for shipment overseas. Finite element analysis was used to specify stronger load columns to allow for a possible 30% lateral load. Loads as high as 30,000 pounds were required for some items. These variables also required a special three coat paint (white).

Need a variable spring? Let us price one for you today!

request-a-quote

Engineered Spring Hanger for Reformer Furnace in Venezuela

August 7th, 1993 No comments
Engineered Spring Hanger for Reformer Furnace in Venezuela

Engineered Spring Hanger for Reformer Furnace in Venezuela

Engineered spring hangers shown are being calibrated and tested at Piping Technology & Products, Inc., Houston, Texas Facility. A digital load cell is attached to the hydraulic press that guarantees calibration to the exact loads specified. The spring hanger will support the tubes in a reformer furnace destined for Venezuela.

Looking for some new engineered spring hangers? Let us price one for you today!

request-a-quote

3400 lb. Load Type F Spring Hangers for Overseas Refinery Plant

June 11th, 1993 No comments
3400 lb. Load Type F Spring Hangers for Overseas Refinery Plant

3400 lb. Load Type F Spring Hangers for Overseas Refinery Plant

The photograph above shows a unique combination of Type F variable springs designed by a client engineer to support large skid-mounted pumps. Piping Technology & Products, Inc. fabricated the connecting assemblies which use variable springs inside pods to support the pump skids from the side. The number of pods varies from size to twelve, depending on the size of the pump, and the loads supported by each type F spring vary from 1800 to 3400 pounds depending on the geometry of the assembly. The distance between rods varies from two to three feet. A total of nine units are being exported to refinery project overseas.

Want to learn more about spring hangers? Instantly view a recording of a live webinar on spring supports!

access-our-webinar-archives

Specially Designed Vertical Constants

June 1st, 1993 No comments
Specially Designed Vertical Constants

Specially Designed Vertical Constants

The vertical constant is used when piping stress is critical and pipe is subject to vertical movement in excess of ½ inch due to thermal expansion, and also at locations here it is necessary to avid any transfer of stress from support or onto critical terminals or connecting equipment. These constants are manufactured by Piping Technology & Products, Inc.

Do you have a requirement for custom constants? Let us serve your needs today!

request-a-quote

Custom Designed Horizontal Constants

May 28th, 1993 No comments
Custom Designed Horizontal Constants

Custom Designed Horizontal Constants

In construction of the horizontal constant, Piping Technology & Products, Inc. uses high quality materials and workmanship throughout, with a liberal factor of safety to insure against temporary shock and overload. Springs hot-wound, double heat treated, pre-set and pre-tested.

Do you see a need for constants in your piping system? Let us price them for you today!

request-a-quote

Custom Designed Vertical Upthrust Constant

March 20th, 1993 No comments
Custom Designed Vertical Upthrust Constant

Custom Designed Vertical Upthrust Constant

Pictured is a vertical upthrust constant developed for an application where the traditional horizontal upthrust would not fit.

Our Canadian customer searched to find existing products to support a pressure vessel which was to be located in an area with no additional horizontal space. PT&P developed this design and tested a prototype within one month to meet customer’s schedule.

Need constants for an upcoming project? Let us price them for you today!

request-a-quote

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy