Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
Fabricated Pipe Shoes, Guides and Anchors — The Pipe Supports Blog

Custom Designed Bolt Cradle Supports for a Chemical Plant in Texas

March 20th, 2017 Comments off

Custom Designed Bolt Cradle Supports for a Chemical Plant in Texas

Type: Custom Bolt Cradle Pipe Supports
Size: 24″ to 36″ Diameter Range
Material: Hot-dipped Galvanized Carbon Steel | Gasket Sealing Material
Testing: Dimensional and Visual Inspection

These supports are custom designed similar to a PTP Fig.900 bolt cradle support. They are fabricated from hot-dipped galvanized carbon steel and were designed for pipe sizes ranging from 24″ to 36″ in diameter. The assemblies include a gasket sealing material that will be installed between the pipe shoe and pipe. The pipe supports underwent dimensional and visual inspection, and stainless steel tags were riveted to the shoes prior to shipping to a chemical plant in Texas.

Heavy Duty Pipe Saddles Designed for an Ethane Cracker

October 11th, 2016 Comments off

Heavy Duty Pipe Saddles Designed for an Ethane Cracker

Type: Heavy Duty Pipe Saddles
Design: 60″ Dia. | 23-5/8″ Length | 5-18″ from BOP
Material: Carbon Steel with a HDG Finish
Testing: Visual | Sample Pipe | Dimensional

Piping Technology & Products, Inc. designed and manufactured these heavy duty pipe saddles for the Ethylene Plant Project in Texas. The saddles are fabricated from A36 carbon steel with a hot-dipped galvanized finish and designed to support pipes up to 60″ in diameter. They measure 23-5/8″ in length and 5-1/8″ from BOP. Standard Q.C., visual inspection with a sample pipe and dimensional tests were performed prior to shipment.

36” Dia. Cryogenic Pipe Saddles Designed for an LNG Facility

October 23rd, 2015 Comments off

36” Dia. Cryogenic Pipe Saddles Designed for a LNG Facility

36” Dia. Cryogenic Pipe Saddles Designed for an LNG Facility

PT&P custom-designed pipe saddles with micarta base insulation for an LNG facility in Australia. The saddles were fabricated from 304L stainless steel plates with thickness ranging from 1/8” to 3/8”. The micarta blocks range in thickness from ¼”-3”. The saddles were designed to support pipes up to 36” in diameter at an operating temperature of -300°F. Standard Q.C. and dimensional tests were performed prior to shipment.

Custom Designed Pipe Hanger & Clamp Assemblies for a Flue-gas Desulfurization Application

June 29th, 2015 Comments off

Custom Designed Pipe Hanger & Clamp Assemblies for a Flue-gas Desulfurization Application

PT&P custom designed pipe hanger and clamp assemblies for a flue-gas desulfurization application in an energy facility located in Kansas. The assemblies are designed for pipes ranging in size from 2-1/2″ to 6″ in diameter, and are capable of a 650 lb. operating load. Materials include tube steel, fig. 92 washer, fig. 122 all threaded rod, fig. 30 turnbuckle, fig. 40 weldless eyenut and fig. 70 pipe clamp.

Bolt Cradle Supports with Slide Plates Designed for a Combined Cycle Facility

July 14th, 2014 Comments off

Bolt Cradle Supports with Slide Plates Designed for a Combined Cycle Facility

PT&P custom designed Fig. 900 bolt cradle supports with slide plates in 3 weeks for a combined cycle facility in Virginia. The supports are fabricated from carbon steel with a hot-dipped galvanized finish. They are 20″ long and range from 1’2-3/8″ to 1’6-7/8″ in height. The cradle supports are designed for an operating temperature range from 300°F to 530°F and are capable of supporting loads ranging from 1,340 lb. to 3,774 lb. with 0.05″ to 3.33″ of axial movement.

Fabricated Pipe Shoes Designed for Large Dia. Piping in LNG Facility

May 23rd, 2014 Comments off

105281a1

A total of forty-five fabricated pipe shoes were designed for large diameter piping in an LNG facility. The saddles are fabricated from 516 Grade 70 carbon steel to withstand low temperatures and have a hot-dipped galvanized finish. They were designed for 30″, 36″ and 48″ diameter pipe sizes.

72 Bolt Cradle Pipe Supports Designed for a Sulphuric Acid Plant

December 30th, 2013 Comments off

72 Bolt Cradle Pipe Supports Designed for a Sulphuric Acid Plant

PT&P manufactured seventy-two bolt cradle pipe supports for a Sulphuric Acid Plant in Canada. The supports are designed for pipes ranging from 1-1/2″ to 20″ in diameter. They are fabricated from carbon steel and coated with a special protective paint for acid service. Standard bolt cradle supports are offered in 2″ to 24″ diameter pipe sizes; however, PT&P can manufacture any size needed for your application.

Pipe Guides Designed for a Recovery Boiler

December 1st, 2013 Comments off

Pipe Guides Designed for a Recovery Boiler

These pipe guides were designed for a recovery boiler in a power plant in Oklahoma. The guides were designed to control lateral pipe movement and maintain the alignment of the piping through its axial and contraction cycles. They were designed to support 6″, 12″ and 18″ pipes and range in length from 70″ – 120″. The assemblies were fabricated from carbon steel with a hot-dipped galvanized finish.

81 Pipe Shoes Designed for a Solar Power Plant in California

August 24th, 2013 Comments off

81 Pipe Shoes Designed for a Solar Power Plant in California

PT&P designed and manufactured eighty one custom pipe shoes for a solar power plant in California. The shoes will support heat transfer in fluid pipes at the facility. They consist of 3/8″ stainless steel slide plates and microtherm insulation. The shoes measure 10″ wide, 10″ height, and 18″ in length with a 750°F operating temperature. The assemblies have a vertical operating load of 10,000 lb. with 2″- 3″ of axial movement.

Adjustable Base Supports Designed to Support Trunnions in an Oil Refinery

May 30th, 2012 Comments off

Adjustable Base Supports Designed to Support Trunnions in an Oil Refinery

We designed a total of ninety-four custom adjustable base supports, similar to Fig. 260 adjustable pipe elbow support, to support elbow trunnions in an oil refinery in Indiana. We fabricated these adjustable base supports from carbon steel plates, all-threaded rods, heavy hex nuts and sch. 80 pipes. They will support pipe sizes ranging in size from 1-1/2″ to 12″ in diameter.

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy