Blog Category: FABRICATED PIPE SHOES, GUIDES & ANCHORS | Piping Technology & Products, Inc.

Improve Piping System Reliability with Anchors, Guides and Slides in Cooling Systems

April 2, 2026

How to Build a Reliable Cooling System with Proper Pipe Supports

A cooling system consists of pipes, slides, guides, and anchors that provide a carefully engineered framework for safely managing pressure, temperature, and flow. These components work together to handle thermal expansion, maintain the integrity of the entire network, and ensure minimal energy loss.

How Pipe Guides Prevent Failure

Pipe guides play a critical role in directing thermal expansion. They ensure that movement travels straight into the expansion joints rather than shifting off-axis. Without this precise direction, pressurized chilled water lines can experience sudden failures. Using the right guides helps maintain the facility’s safety by keeping forces contained within their intended path.

How to Improve Performance with Low-Friction Slide Plates

To further protect the system, engineers often integrate slide plates lined with PTFE. These plates allow chilled water pipes to move smoothly with very little friction. This setup reduces the overall wear and tear on the piping and supports. When movement is fluid and unrestricted, the system lasts longer and requires less frequent maintenance, saving the operator time and costs.

Pipe anchors are used to isolate the piping system from the process equipment and prevent end forces from system expansion and contraction from being transferred to sensitive process equipment that isn’t designed to carry them.

Secure Your Piping System with Anchors, Guides, and Slides

Contact our engineering team today to discuss custom supports and 3D design verification for your next project.

Real World Examples:

Spring Supports with PTFE, 25% Glass Filled Slide Plates for a Plant in China

PTFE Slide Plates Designed for a Refinery in Louisiana

Pipe Guides Designed for a Recovery Boiler

Frequently Asked Questions: Pipe Anchors, Guides, and PTFE Slides

42″ Dia. Heavy Duty Insulated Pipe Support Anchors for a High Temperature Application

What are the main benefits of using pipe guides in cooling systems?

Pipe guides prevent catastrophic failures by directing thermal expansion into expansion joints. This keeps movement aligned and protects pressurized lines from shifting in dangerous directions.

How do PTFE slide plates help industrial piping?

PTFE-lined slide plates provide a low-friction surface, allowing pipes to move easily as they expand or contract. This reduces physical stress and wear on the cooling system components.

What is design verification for pipe supports?

Design verification involves using 3D modeling and 3D printing to test specialty pipe supports before they are manufactured. This helps clients confirm that the supports will work correctly in complex cooling systems.

Can I get custom designs for my facility’s piping framework?

Yes, PT&P offers custom design capabilities to create supports, anchors, and guides tailored to specific cooling system requirements. This ensures the system has the exact flexibility and strength it needs to run safely.

Hold-Down Clamps for a Waste Disposal Facility

January 13, 2026

These custom-fabricated hold-down pipe clamps assemblies are designed to effectively control vibration and protect piping systems in demanding industrial environments. Each assembly incorporates wedges made from 25% glass-filled PTFE, which absorb vibration while providing a protective buffer between the steel pipe and the pipe support.

Flow-induced and acoustic-induced vibration are common challenges in Power, Solar, Biofuels, and Chemical plants, as well as in pipelines located near rotating equipment such as reciprocating pumps and compressors. Left unchecked, vibration can lead to cracking, premature failure, and costly unplanned shutdowns. Our engineered solutions help mitigate these risks in both onshore and offshore applications.

The assemblies shown are custom-designed for pipe sizes up to 20″ in diameter and operating temperatures up to 200°F. Adjustable to accommodate a range of elevations from Top of Steel (T.O.S.) to Bottom of Pipe (B.O.P.), each unit measures 21″ wide × 26″ long × 23″ high and has been proven to reduce vibration to acceptable levels.

Fabricated from A36 carbon steel plate with A307 grade all-threaded rods, all components are hot-dip galvanized for corrosion resistance. Every assembly undergoes a thorough quality control inspection prior to shipment—ensuring reliable performance you can trust.

Custom Pipe Clamps for 256-Mile Natural Gas Pipeline Across Ohio

June 16, 2025

Project-Driven Pipe Clamp Fabrication Delivered in 8 Weeks

A construction firm set out to build a 256-mile natural gas pipeline across Ohio to meet the growing energy needs of the Midwest. A few challenges: ensuring that support components for the 42-inch diameter line could meet technical requirements and scheduling demands with no room for error.

To ensure the safe and long-term operation of its piping systems, the project team turned to Piping Technology & Products (PT&P) to design and deliver more than 100 custom-fabricated pipe clamps

Project Requirements and Pipe Clamp Design Specifications

The project managers could not afford delays, rework, or compliance issues from unsuitable pipe clamps that did not adhere to engineered specifications.
What the project demanded:

Custom-manufactured clamps for 42-inch OD pipe
Hot-dip galvanized for outdoor exposure, which would minimize future maintenance needs

PT&P engineered and manufactured 110 heavy-duty pipe clamps tailored to this job’s exact needs from our Houston facility.

Technical Highlights: How the Pipe Clamps were Built

Pipe Diameter: 42 inches
Clamp Width: 12 inches
Material: A36 carbon steel body with bonded vibration control materials (Other options: Neoprene, PTFE, isolation pads, Fabreeka®, and more)
Fabrication: In-house manufacturing
Quality Control: Visual examination and fit-up verification for pipe OD were conducted before shipment to meet industry-standard inspections
Delivery: 8 weeks, end-to-end

Engineer’s Take: Structurally Sound and Specification-Driven

Engineers on this project required proof that their supports would withstand the field conditions. Our clamp design included bonded wear pads to protect the pipe from damage and corrosion. All materials were verified to meet MSS SP-58 guidelines, ensuring long-term performance with no compromise on safety.

Project Manager’s Take: Zero Rework, On-Time Delivery

Avoiding schedule slippage was critical. By validating technical requirements at each stage, we avoided rework, reduced delays, and delivered with confidence. Our 8-week turnaround and proactive communication, which included scope reviews, design approvals, milestone check-ins, and regular updates, eliminated guesswork. Every clamp arrived jobsite-ready, clearly labeled, spec-compliant, and fit to install with no field adjustments.

Why Project Managers Choose PT&P Pipe Clamps

Short Lead Times: Most of our products have an 8-week turnaround time, even on complex builds
Built to Spec: Made to your specs, no compromise on fit or load (standard products are also available)
Made in the USA: Full fabrication and QC from our Houston facility
Production Scalability: Capable of supporting both small-volume and high-volume orders

Clamp Configurations We Offer

We manufacture a wide range of pipe clamps, including:

Standard pipe clamps
Adjustable clamps
Riser clamps
U-bolts
Fully custom configurations and options on materials and coatings

Most complex builds are fabricated to order at our Houston facility to meet exact project needs, whether that’s load rating, environmental resistance, or non-standard diameters.

By delivering precisely engineered, high-quality clamps, PT&P supported the safe and efficient development of this state-wide pipeline project. We are proud to support cleaner energy transitions by enabling fuel switching from coal to gas and allowing access to lower-cost shale gas reserves.

Most large-scale projects require tailored designs like this one. That is why, with recent investments in our manufacturing operations, we are uniquely positioned as the only manufacturer to provide high-quality, custom-made solutions for your piping systems to our clients faster and on a larger scale than ever.

Need Project-Specific Pipe Clamps?

Our ability to design and manufacture sets us apart, providing confidence and assurance to our clients and their customers that we will strictly adhere to their specifications and job site requirements.

We’re one of the few U.S. manufacturers with in-house engineering, custom fabrication, and full quality control (QC) capabilities for high-specification pipe clamps.

Talk to an Engineer about your next project or Request a Quote today.

Adjustable Pipe Stands Built to Simplify Installation and Reduce Rework

May 12, 2025

Adjustable Pipe Stands to Support Ductile Iron Pipe

Engineered for Real-World Pipeline Adjustments and Long-Term Stability

When pipelines expand, contract, or shift due to temperature or pressure changes, every EPC team knows one thing: the pipe support system must flex with them, without sacrificing safety or structural integrity. Adjustable pipe stands compensate for onsite variances, allowing installers to make real-time height or positioning changes.

These stands support the pipe and its contents while transferring the load to the structure below. The vertical adjustment feature makes accounting for elevation differences and thermal movement easier. The design of the pipe stand allows it to be easily installed, adjusted, and maintained.

Custom-Built Pipe Stands for a Gulf Coast Natural Gas Facility

We manufactured adjustable pipe stands for a natural gas processing plant on the US Gulf Coast. Our team designed these supports to meet strict project demands, including:

Pipe sizes ranging from 10″ to 20″
Heavy axial loads exceeding 6,000 lbs
Frequent thermal cycling from gas temperature shifts
Harsh, corrosive coastal environments

Our engineering team worked closely with the EPC contractor throughout design and procurement. Each pipe stand was fabricated to exact elevation and load specifications.

Because they’re adjustable, the pipe stands allow precise field alignment. This saves time during installation and helps ensure a smooth commissioning process.

Adjustable Pipe Stands: Built for the Energy Sector and Beyond

This set of adjustable pipe stands was part of a larger infrastructure upgrade in the U.S. natural gas sector, where precision, safety, and long-term reliability are non-negotiable.

Adjustable pipe stands like these are commonly used in:

Gas processing plants
Loading skids for rocket propulsion
Waste water treatment facilities
Petrochemical facilities
LNG terminals
Compressor stations

Midstream pipeline projects

What Are Adjustable Pipe Stands?

Adjustable pipe stands are external supports designed to sit on structural steel or embedded concrete pedestals. They’re ideal for systems exposed to thermal expansion, elevation changes, or installation mismatches.

Key benefits of adjustable pipe stands include:

Height can be adjusted to handle pipe movement from thermal expansion or contraction.
Installs easily with little to no welding or field rework required.
Built for durability and able to perform in harsh conditions.
Proven, robust design that reduces long-term maintenance needs.

Why Engineers Choose Adjustable Pipe Stands in Their Designs

Our fig. 44 adjustable pipe stands are a trusted choice for engineers designing complex piping systems. They offer critical flexibility and compatibility across a wide range of pipe sizes and configurations.

With known load ratings and adjustable elevation, engineers can:

Avoid over-specifying fixed supports that may fail when pipes expand or contract.
Build in flexibility early by modeling the fig. 44 adjustment range into 3D plant layouts.
Prevent late-stage rework when elevation specs are finalized near the end of design.
Ensure construct ability with a proven, field-ready design.

These pipe stands also support value engineering. Their flexibility is especially helpful in brownfield retrofits and multi-phase projects. Each design is load-tested by our QA/QC teams at our manufacturing plant located in Houston, Texas, compliant with ASME support standards, and built for safe, stable use in the field.

Why Project Managers Trust Adjustable Pipe Stands

Project managers count on adjustable pipe stands to solve challenges that appear late in the schedule, without creating new ones.

They help:

Simplify alignment in the field, reducing delays.
Cut back on field welding or grinding during installation.
Fix tolerance gaps found during QA/QC or commissioning.
Shorten install time and reduce labor hours..

When your project scope shifts or your timeline tightens, adjustable pipe stands give you back margin, keeping your install on track and within budget.

Additional Engineered Supports for Energy Applications

We also manufacture a full range of engineered pipe supports tailored to energy sector demands:

Pre-insulated pipe supports for cryogenic and high-temperature lines
Sway braces and snubbers for seismic and dynamic control
Constant and variable spring supports
Pipe shoes and saddles for elevated piping runs
Anchor supports to restrain pipe movement in critical areas

All supports are built to meet or exceed ASME and ASTM standards and can be customized with special coatings, finishes, or material upgrades to match your site conditions.

Plan Confidently. Install easily. Build faster.

When technical performance and schedule certainty are key, adjustable pipe stands offer engineers and EPC project managers peace of mind. From engineering through delivery, our engineering team and technical specialists work as an extension of your team to deliver pipe support solutions that are:

Code-compliant
Field-adjustable
Built for long-term use

Talk to an engineer today to discuss your application and receive a custom solution for your project needs.

Talk to an engineer today or Request a Quote
PT&P REF. ORIGINAL POST 05022007

Hold-Down Pipe Clamps for a Steam Methane Reformer (SMR) Supplying High-purity Hydrogen

August 20, 2024

PT&P has significant expertise in the custom design and fabrication of hold-down pipe clamps, specifically tailored for piping systems and skid-mounted units across the power, chemical, and refinery industries worldwide. These hold-downs are engineered to minimize vibration caused by rotating equipment and to protect the surrounding piping systems from potential damage.

The hold-downs are constructed from carbon steel and feature a hot-dipped galvanized coating for enhanced durability. To further improve their performance, PTFE slide plates are incorporated into the design, which reduces friction between the pipe and the clamp, allowing for controlled movement when necessary. Additionally, fabric pads are used to enhance vibration dampening, ensuring the integrity of the system.

These clamps are designed for pipelines with diameters ranging from 2″ to 16″. The dimensions of the hold-downs vary, with sizes ranging from 3″ wide x 9-1/8″ long to 8″ wide x 25-3/4″ long. They are built to withstand operating temperatures of up to 200°F. A meticulous Quality Control visual inspection was conducted prior to shipment, ensuring that only the highest quality products are delivered.

Hold-downs are used in many applications. This year we have supplied them to refineries, semiconductor plants, chemical plants, and power plants. We were the first in the industry to create a catalog to make it easy for our clients to select what would work best in their application. Take a look at a Product Figure Index to see what we offer. PT&P can custom design and fabricate hold-downs for any pipe size application. Beyond hold-downs, PT&P also offers a variety of vibration control devices designed to accommodate different pipe orientations and locations, providing comprehensive solutions for vibration management in complex piping systems.

PT&P REF. ORIGINAL POST 09222020

Hold-Down Pipe Clamps Designed for a 36″ Diameter Natural Gas Pipeline

June 4, 2024

Type:	HD-2 Hold-Down Pipe Clamps
HD Size:	36″ Dia. x 12″ W x 8-7/16″ H
Wedge Size:	23-3/16″ L x 6″ W
Material:	Carbon Steel \| PTFE
Testing:	Standard Q.C. Tests

PT&P designed 50 HD-2 hold-down pipe clamps with pipe wedges for a natural gas pipeline in Texas. They were fabricated from carbon steel and include PTFE slide plates. The hold-downs are designed for a 36″ pipeline, and are 12″ wide by 8-7/16″ tall. The wedges are 23-3/16″ long by 6″ wide. They are designed for an operating temperature of 400°F and have an adjustable height. Standard quality control tests were performed prior to shipment.

The natural gas pipeline network in the United States is indeed extensive, with over 3 million miles of pipelines crisscrossing the country. These pipelines play a crucial role in transporting natural gas from production sites, such as gas wells and processing plants, to distribution centers and ultimately to consumers, including both commercial and residential users. This vast network ensures that natural gas, an essential energy source for heating, cooking, and electricity generation, reaches homes and businesses across the nation reliably and efficiently.

At Piping Technology and Products, we specialize in custom-designed hold-down clamps meeting the requirements for a large array of clients. Hold-down clamps are a versatile pipe support used in various industries and applications to secure pipelines, and they play a crucial role in ensuring workpiece stability, precision, and safety across a wide range of processes in the chemical, refinery, and power plant industries.

PT&P REF. ORIGINAL POST 04082019

36” Dia. Cryogenic Pipe Saddles Designed for an LNG Facility

November 14, 2023

36” Dia. Cryogenic Pipe Saddles Designed for an LNG Facility

PT&P custom-designed pipe saddles with micarta base insulation for an LNG facility in Australia. The saddles were fabricated from 304L stainless steel plates with thickness ranging from 1/8″ to 3/8″. The micarta blocks range in thickness from 1/4″-3″. The saddles were designed to support pipes up to 36″ in diameter at an operating temperature of -300°F. Standard Q.C. and dimensional tests were performed prior to shipment.

A pipe saddle is any pipe support that cradles a pipe and transfers the pipe’s load weight onto a supporting base. Much like a saddle on a horse supports a rider and keeps them from bouncing on the animal, pipe saddles support a pipe’s weight. Pipe saddles are commonly used on large-diameter piping where the load is exceptionally heavy or when contraction-expansion movement is expected. Pipe saddles are welded to the pipe and are used in conjunction with roller supports or on-beam supports.

With the current uptick in global LNG demand driving US-based LNG production, Piping Technology and its subsidiaries are well-positioned to support large-scale projects in a timely manner. Our engineering and production teams work closely with our clients to ensure site, operator, and design needs are met. LNG demand is positioned to continue to grow by over 60% by 2035.

PT&P REF. ORIGINAL POST 10232015

Clamped Pipe Shoes Custom-Designed for an Offshore Vessel Project

August 22, 2023

These special clamped pipe shoes with isolators were supplied for an offshore vessel project. Offshore renewable energy companies are exploring the viability of developing an offshore charging facility for electrified vessels and using ammonia-powered or hydrogen-powered fuel cells to power marine vessels. As the world’s only major expansion joints and engineered pipe supports manufacturer, we are uniquely positioned to service various piping needs. The 210 pipe shoes were fabricated from carbon steel for pipe sizes ranging from 1″ to 24″ in diameter. They are supplied with a hot-dipped galvanized finish for corrosion resistance and range in length from 8″ to 16″ with 4″ from the BOP. These pipe shoes include a dampening isolator in between the pipe and the shoe to reduce vibration and noise. The isolator pad is typically made of a “rubber bonded cork elastomeric” which can be designed to suit the application for temperature and other system needs as specified.

1,485 supports were supplied for this order, including these pipe shoes. At Piping Technology and Products, we supply products to facilities that are helping to reduce carbon emissions and dependence on fossil fuels.

PT&P REF. ORIGINAL POST 06292021

Standard Pipe Support Components Available on Amazon

September 21, 2022

Need a standard product quickly? Or know what you need and don’t need a quote? Skip the line and order through Amazon. From forged carbon steel turnbuckles and light or heavy 2-bolt, 3-bolt pipe clamps, riser clamps to long tangent u-bolts, we stock standard sizes for your quick-turn orders.

*If you need assistance, we are always available 24×7 via our emergency service or just send an email to [email protected].

Fig. 30 Forged Carbon Steel Turnbuckle	Fig. 60 Heavy Two-Bolt Pipe Clamp
Fig. 70 Light Three-Bolt Pipe Clamp	Fig. 80 Heavy Three-Bolt Pipe Clamp
Fig. 90 Riser Clamp	Fig. 100 Long Tangent U-Bolt
Piping Technology & Products, Inc. Expansion Joint (85 PSI)	Piping Technology & Products, Inc. Expansion Joint (150 PSI)
Piping Technology & Products, Inc. Expansion Joint (300 PSI)

230 Chromoly Pipe Shoes & Clamps for a Natural Gas-Fed Ammonia Plant

September 27, 2021

PT&P custom-designed 230 Chromoly pipe shoes & clamps for service at a natural gas-fed ammonia plant. The pipe shoes are designed for 1″ to 42″ diameter pipelines and coated with red epoxy for high temperatures (above 750°F). Each pipe shoe design utilizes custom two-bolt pipe clamps manufactured from 387 GR. 11 CL 2 material. This design is especially useful when welding to the process pipe is prohibited. These shoes clamp around the pipe instead of welding to the pipe in order to support a given load. Special bolting is required for high temperatures utilizing A 193 GR. B16 bolting material. Quality assurance inspection was conducted prior to shipment.