Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
Pre-Insulated Pipe Supports — The Pipe Supports Blog

42″ Dia. Heavy Duty Insulated Pipe Support Anchors for a High Temperature Application

July 5th, 2013 Comments off

42" Dia. Heavy Duty Insulated Pipe Support Anchors for a High Temperature Application

PT&P designed and fabricated heavy duty insulated pipe support anchors for a high temperature application. The base, clamps, nuts, jackets and bolts are all fabricated from hot-dipped galvanized carbon steel. The hot shoes have 3″ thick high density calcium silicate insulation, and are designed for 12″-42″ diameter pipes. The dimensions are 47″ L X 51″ W X 16″ H. Standard Q.C. and dimensional tests were performed prior to an expedited shipment.

Cryogenic Insulated Pipe Supports Designed for a Natural Gas Refinery

June 23rd, 2013 Comments off

Cryogenic Insulated Pipe Supports Designed for a Natural Gas Refinery

Over 1200 cryogenic insulated pipe supports were designed for a natural gas refinery in Abu Dhabi. The supports range from 1″ to 30″ in diameter and have 30 lb. polyurethane foam (PUF) insulation. These cold shoes are comprised of a vapor barrier, an aluminum jacket and a carbon steel base. An ice test was performed on all the supports prior to shipment.

Cryogenic Trunnions with Permali® Blocks Designed for Ethylene Loss Recovery Lines

May 20th, 2013 Comments off

Cryogenic Trunnions with Permali® Blocks Designed for Ethylene Loss Recovery Lines

PT&P designed cryogenic trunnion supports for ethylene loss recovery lines at a plant in Texas. The trunnions were fabricated from 2″ dia. stainless steel pipes and have a maximum height of 3′. They include 6″ x 6″ permali® blocks measuring 2″ thick each. The permali® block isolator is a laminated phenolic material from layers of wood impregnated under vacuum and heat with synthetic resin. The temperature range for these supports is from ambient to -300°F.

72″ Dia. Cryogenic Pipe Supports Designed for an LNG Facility

May 6th, 2013 Comments off

72" Dia. Cryogenic Pipe Supports Designed for an LNG Facility

Custom designed cryogenic pipe supports were fabricated for an LNG facility in Africa. The shoes range in diameter from 30″ to 72″, 45″ to 88″ in height, 42-1/2″ to 85-1/2″ in width, and 28″ to 33″ in length. The insulation is a high density polyurethane foam (PUF) ranging from 5″ to 6″ thick. The shoe and bearing plates were fabricated from carbon steel with a HDG finish. The jacket was fabricated from aluminized steel and includes a vapor barrier.

 

Pre-Insulated Pipe Supports for both Cryogenic and High Temperature Applications

April 25th, 2013 Comments off

This Webinar is over, view the recording at: http://info.pipingtech.com/pre-insulated-support-webinars/

 

Cold ShoesExplore how Polyurethane foam is produced, from mixing polyols and isocyanates to inspecting the final product. Learn about anchor shoe testing, lateral load testing, compressive strength testing, and axial load testing. Increase your understanding of the value-added services that are offered by PT&P, and rest assured that your Pre-Insulated Pipe Support needs can be covered by our 24×7 web-based emergency services, providing field service, and quick-turn around time when you need it most.

The featured presenter, Jerry Godina has over 15 years experience as a pipe support designer and manages PT&P’s engineer training development program. He also inspects existing supports, consults on site remediation projects and oversees installation on a regular basis.

 

Cryogenic and Axial Stop Cold Shoes for an LNG Facility

November 18th, 2012 Comments off


Piping Technology and Products supplied these cryogenic and axial stop cold shoes for an LNG facility in Australia. A total of 28 assemblies were fabricated with carbon steel, stainless steel and Micarta® G-10 insulation blocks. They were a wide range of lengths from 24″ to 36″, widths from 6 3/4″ to 30″ and heights from 9″ to 10 1/4″. The pipe shoes will support pipes ranging in diameter from 6″ to 48″ NPS in cryogenic temperatures as low as -162°C. A special paint system was used for the carbon steel components to resist rust. PMI testing was performed on the stainless parts prior to shipping.

274 Custom Hot Pipe Shoes Rush Delivered in Three Weeks

August 27th, 2012 Comments off

3 Week Turnaround on 274 Custom Designed Hot Shoes

We provided a quantity of 274 custom designed hot shoes on an expedited basis to a factory in Arizona. While the normal delivery time on a typical order might be 6-8 weeks, Piping Technology provided these pipe shoes on a 3 week delivery time. The high temperature pipe supports include clamping material fabricated from carbon steel with a red oxide finish, a polyethylene slide base with stainless steel slide plates, high density calcium silicate insulation and an overlapping galvanized sheet metal jacket. The pipe shoes are designed to accommodate 4″-8″ pipes and have an insulation thickness of 2″-3″ and the base measures 11″ to 14″ in width, and 6″ to 15″ in length. The hot shoes are designed for temperatures ranging from 40° F to 600° F. The insulation for these supports is a combination of high density calcium silicate with high strength inserts.

Custom High Temperature Pipe Supports for a Granular Activated Carbon Manufacturing Plant

January 30th, 2012 Comments off

Custom High Temperature Pipe Supports for a Granular Activated Carbon Manufacturing Plant
These high temperature pipe supports have a 25″ outside diameter, and were custom designed for a granular activated carbon manufacturing plant in Hawaii. They are fabricated from A-36 carbon steel with 10″ thick high density calcium silicate insulation. The hot shoes were designed for a 4″ diameter pipe-line, temperatures up to 1,800°F and an operating load of 1,000 lb. Standard Q.C. and dimensional tests were performed prior to an expedited shipment.

Do you require hot shoes on an upcoming project? Get pricing today!

request-a-quote

Cold Insulated Pipe Anchors with Axial Stops

August 15th, 2011 No comments

Cold insulated pipe anchors with axial stops

Cryogenic pipe supports, ranging in diameter from 6″ to 38″, were designed to support and insulate piping in an LNG receiving and regassification plant. The “cold shoe anchors” were designed for temperatures down to -260°F and a load range of 26,000 lb. to 210,000 lb. A combination of high density polyurethane foam (PUF) and Permali® was used for the insulation. The center stops that are welded to the process pipe were built from 304 stainless steel, and carbon steel was used for the remainder of the shoe.

Cold insulated pipe anchors with axial stops

Do you have a need for cold shoes in your piping system? Get pricing today!

request-a-quote

Insulated Pipe Supports Designed for Cryogenic Temperatures Down to -320°F in an LNG facility

May 31st, 2011 No comments

insulated pipe supports designed for cryogenic temperatures down to 320°F in an LNG facility

insulated pipe supports designed for cryogenic temperatures down to 320°F in an LNG facility

A total of 295 cryogenic pipe supports ranging from 4″ to 38″ NPS were designed for a LNG regasification facility in India. The shoe and bearing plates were fabricated from carbon steel, the jacket was fabricated from aluminized steel and includes a vapor barrier. 20 PCF high density polyurethane foam was used for the insulation.

Do you see a need for cryogenic supports in your piping system? Get pricing today!
request-a-quote


Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy