Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
Pre-Insulated Pipe Supports — The Pipe Supports Blog

Pre-Insulated Pipe Supports with 12″ Thick Insulation Designed for a 49″ High Temperature Line

April 18th, 2011 No comments

Pre-Insulated Pipe Supports with 12" Thick Insulation Designed for a 49" High Temperature Line

PT&P fabricated pre-insulated pipe supports from galvanized carbon steel designed for a 49″ diameter pipe and temperatures in excess of 1600°F. The insulation is 12″ thick and composed of lime, silica and reinforcing fibers. This type of insulation features exceptional strength and extremely low water absorption. It is essentially dust-free, contains no asbestos and is a very good material for structural insulation inserts. This “hot shoe” will be used in a cat cracker unit at a refinery in Alabama.

Want to learn more about pre-insulated supports? View a recording of a past webinar now!
access-our-webinar-archives

Insulated Pipe Supports for Temperatures as Low as -260°F for a 30″ Diameter Pipe in a LNG Receiving & Regasification Plant and Refinery

January 25th, 2011 No comments

Cryogenic Supports for a LNG Receiving & Regasification Plant and Refinery

These cryogenic supports (also known as cold shoes) are fabricated from 20 PCF polyurethane insulation, weigh 650 lb. each and are designed for 30″ diameter pipe. They are comprised of a carbon steel base plate and bearing plate, a vapor barrier and an aluminum jacket. The supports are designed for temperatures as low as -260°F, and measure 27″ length by 44″ height. A total of thirty-four supports were fabricated for natural gas applications, including storage and transport.

Do you see a need for cryogenic supports in your piping system? Get a quote today!

request-a-quote

Take a Look into the Past: Insulated Pipe Supports

December 17th, 2010 No comments

Check out our most recent article that looks at the history of insulated pipe supports through the past 100 years.  Learn about the developments made in the 1950′s and 1960′s that introduced the use of “Foam Glass”, a lightweight material that is manufactured primarily from recycled glass and used in the design of insulated pipe supports. Later, polyurethane was developed to provide greater load carrying capabilities. Read the full article on the:

History of Insulated Supports

Permali® Insulated Pipe Anchors

Permali® Insulated Pipe Anchors

Want to learn more about pre-insulated supports? Instantly view a past pre-insulated support webinar now!
access-our-webinar-archives

Cryogenic Supports with Permali® Insulation for an LNG Plant in Abu Dhabi

December 6th, 2010 No comments
Cryogenic Supports with Permali® Insulation for an LNG Plant in Abu Dhabi

Cryogenic Supports with Permali® Insulation

Over 30 cryogenic supports fabricated from a combination of carblon steel, permali® block and stainless steel were manufactured for an LNG plant in Abu Dhabi. The shoes measures 18″ x 14″ x 12″ and are designed for 10″ of thermal movement and temperatures as low as -167°C. The cold shoes are coated with a custom paint job and went through standard testing prior to shipment.

Have a need for cryogenic supports in a current or upcoming project? Get a quote today!
request-a-quote

Sliding Cryogenic Insulated Supports for a 60" Diameter Vapor Line

October 25th, 2010 No comments
Sliding Cryogenic Insulated Supports for a 60" Diameter Vapor Line

Sliding Cryogenic Insulated Supports

These sliding cryoshoes are fabricated from carbon steel with 2″ thick polyurethane insulation. The polyurethane is 20 lb. density, which has a compressive strength of 500 psi and a tensile strength of 600 psi. The cold shoes are designed for temperatures as low as -300°F and for loads up to 3,500 lb. They will be used to support a 60″ diameter low temperature vapor line in a Texas facility.

Want to learn more about cryogenic supports? Instantly view a past webinar now!

access-our-webinar-archives


Cryogenic Pipe Supports with Micarta Insulation for a LNG Plant

September 28th, 2010 No comments

Cryogenic Pipe Supports with Micarta Insulation for a LNG Plant

These cold shoes are fabricated from stainless steel and carbon steel with Micarta insulation. The supports vary in length from 12″ to 36″ and are capable of temperatures as low as -260°F. 40 supports in total were fabricated and hot dipped galvanized for corrosion protection at a LNG plant.

Do you see a need for cryogenic supports in your piping system? Get pricing today!
request-a-quote

Updated: Pre-Insulated Pipe Support Catalog

September 3rd, 2010 No comments

We’ve been making some big changes on our pre-insulated pipe support online catalog. These changes have made it a lot easier for you to navigate the site and find the best hot or cold pipe shoe to fit your needs!

Some of the new features include:
– Drop down menu
- Catalog Search Box
- Catalog Price Request form Embedded in Page
- Easy to navigate glossary of terms

…and more! We look forward to serving your pre-insulated pipe support needs.

Cold Shoe Anchors with Micarta Insulation for a LNG Plant

August 3rd, 2010 No comments

Cold Shoe Anchors with Micarta Insulation for a LNG Plant

The cold shoes are fabricated from a combination of carbon steel, micarta insulation, and stainless steel. They measure 18″ x 12″ x 10″ and are designed for 7″ of lateral movement with temperatures as low as -162°C. A total of 16 supports were manufactured and PMI tested. This was a rush order completed in just under 12 weeks for a LNG plant.

Want to learn more about pre-insulated supports? Instantly view a pre-insulated support webinar! access-our-webinar-archives

Insulated Trunnions for a LNG Plant

July 27th, 2010 No comments

Insulated Trunnions for a LNG Plant

Piping Technology & Products, Inc. manufactured 29 insulated trunnions ranging in NPS from 1.5″ to 10″ with the larger trunnion measuring 54″ in height. The trunnions were fabricated from 304 stainless steel with Micarta insulation. They will be used in an LNG plant as insulated pipeline elbows.

Do you see a need for insulated trunnions in your plant? Get pricing today!
request-a-quote

399 Pre-Insulated Pipe Supports for a LNG Facility

June 29th, 2010 No comments
Pre-Insulated Pipe Supports for 56" pipe size

Pre-Insulated Pipe Supports for 56" pipe size

Piping Technology & Products, Inc manufactured the pre-insulated supports with 4″ of insulation thickness for pipe sizes ranging from 36″ to 56″ in diameter.

Pre-Insulated Pipe Supports for 36" pipe size

Pre-Insulated Pipe Supports for 36" pipe size

The cold shoes were fabricated from a combination of 10 and 20 PCF of polyurethane insulation. They also include a vapor barrier, aluminum jacket, acoustic layer, and are coated with a hot dipped galvanized finish. The supports will be used for a project in North Africa.

Want to learn more about pre-insulated supports? Watch a recording of a past webinar!
access-our-webinar-archives


Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy