Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
Pre-Insulated Pipe Supports — The Pipe Supports Blog

399 Pre-Insulated Pipe Supports for a LNG Facility

June 29th, 2010 No comments
Pre-Insulated Pipe Supports for 56" pipe size

Pre-Insulated Pipe Supports for 56" pipe size

Piping Technology & Products, Inc manufactured the pre-insulated supports with 4″ of insulation thickness for pipe sizes ranging from 36″ to 56″ in diameter.

Pre-Insulated Pipe Supports for 36" pipe size

Pre-Insulated Pipe Supports for 36" pipe size

The cold shoes were fabricated from a combination of 10 and 20 PCF of polyurethane insulation. They also include a vapor barrier, aluminum jacket, acoustic layer, and are coated with a hot dipped galvanized finish. The supports will be used for a project in North Africa.

Want to learn more about pre-insulated supports? Watch a recording of a past webinar!
access-our-webinar-archives


Pre-Insulated Pipe Supports for an LNG Plant

June 1st, 2010 No comments
Pre-Insulated Pipe Supports for an LNG Plant

Pre-Insulated Pipe Supports for an LNG Plant

PT&P manufactured a total of 1,400 supports for an LNG project. 75 of those supports were cold supports completed in less than one week on an emergency basis. The cold shoes were fabricated from a combination of polyurethane foam, carbon steel metal straps, and an aluminum metal jacket for insulation. They are designed for temperatures as low as -300°F and pipe sizes ranging from 12″ to 36″ in diameter. The 36″ diameter shoes are designed for a vertical load of 102,000 lb. and the 12″ diameter shoes are designed for 36,000 lb. load.

Do you require pre-insulated supports in your piping system? Get a quote from us now!
request-a-quote

60" Diameter Cold Support for a Thermal Energy Storage Tank

April 20th, 2010 No comments
60" Diameter Cold Support for a Thermal Energy Storage Tank

60" Diameter Cold Support for a Thermal Energy Storage Tank

This cold shoe is manufactured from carbon steel and has 2-1/2″ thick polyurethane insulation. It is designed to support a vertical load of 2700 lb. and can withstand a temperature range from -100°F to 70°F. The cold shoe will be used in a 60″ diameter thermal energy storage tank for power generation.

Want to learn more about cold shoes? Instantly view a past cold shoe webinar!
access-our-webinar-archives

Foam Glass – PUF Hybrid Cold Supports for 16″ Dia. Pipe

March 9th, 2010 No comments
Foam Glass – PUF Hybrid Cold Supports for 16″ Dia. Pipe

Foam Glass – PUF Hybrid Cold Supports for 16″ Dia. Pipe

These foam glass-PUF hybrid insulated supports are designed for a temperature range of 77°F to -300°F. They are designed for a 16″ diameter pipe and have a load capacity of 11,050 lb. The 2-1/2″ thick insulation consist of foam glass on the upper half and polyurethane (PUF) on the bottom half. The clamps, ribs and base are fabricated from A-36 carbon steel.

Want to learn more about cold supports? Watch an instant webinar on cold shoes!
access-our-webinar-archives

72" I.D. Cryogenic Insulated Supports for a Project in Algeria

February 16th, 2010 No comments
72″ I.D. Cryogenic Insulated Supports

72″ I.D. Cryogenic Insulated Supports

PT&P manufactured 72″ dia. insulated supports for temperatures as low as -260°F. The insulation is multi-layered comprised of polyurethane foam with a density of 20 PCF, a vapor barrier, an aluminum metal jacket, and acoustic pads. The acoustic pads are installed around the cold shoe to absorb vibration. The base and bearing plates are fabricated from carbon steel. The shoes will be used to support and insulate piping in a receiving & regassification plant and refinery.

Do you require cryogenic insulated supports in your piping system? Get pricing now!
request-a-quote

Cryogenic Insulated Supports with Acoustic Pads for a Project in Algeria

February 9th, 2010 No comments
Cryogenic Insulated Supports with Acoustic Pads

Cryogenic Insulated Supports with Acoustic Pads

The operating temperature for these cryogenic shoes ranges from -290°F to 90°F. They are designed for 56″ diameter pipe and are capable of supporting loads up to 40,000 lb. The insulation is multi-layered comprised of 20 PCF polyurethane, a vapor barrier, an aluminum metal jacket, and acoustic pads. The acoustic pads are installed around the cold shoe to absorb vibration. The base and bearing plates are fabricated from carbon steel.

164 Wide Base Sliding Insulated Supports for a Power Station

February 2nd, 2010 No comments
164 Wide Base Sliding Insulated Supports

164 Wide Base Sliding Insulated Supports

The hot shoes are fabricated from A-36 carbon steel with 304 stainless steel slide plates. The 18″ dia. hot shoe has a maximum vertical load of 5500 lb. and the 24″ dia. hot shoe is capable of loads up to 13,750 lb. All the supports in this project are designed for temperatures of up to 1200°F. In addition to the insulation, these supports are capable of sliding axially or laterally as part of the piping system.

25-7/8″ Diameter High Temperature Supports for a Rush Job

November 17th, 2009 No comments
25-7/8″ Diameter High Temperature Supports for a Rush Job

25-7/8″ Diameter High Temperature Supports for a Rush Job

PT&P fabricated hot shoes with an insulation thickness of 2 ½” and a pipe size of 20″. The supports are fabricated from carbon steel with a red oxide finish and calcium silicate insulation. They are capable of loads up to 3400 lb. and temperatures ranging from 40°F to 1200°F. PT&P completed delivery for this rush job within two weeks.

Want to learn more about hot shoes? Instantly watch a pre-insulated support webinar today!

access-our-webinar-archives

58″ Diameter High Temperature Rotational and Axial Stop Insulated Supports

September 1st, 2009 No comments
58" Diameter High Temperature Rotational and Axial Stop Insulated Supports

Quality Control Check

 

58" Diameter High Temperature Rotational and Axial Stop Insulated Supports

Rotational and Axial Stop Hot Shoe

Piping Technology & Products, Inc. manufactured high temperature rotational and axial stop insulated supports for styrene lines in a petrochemical complex. The supports have an overall outside diameter of 58″ and are capable of handling temperatures up to 1500°F. They are fabricated from a combination of carbon steel for the top and stainless steel for the bottom. The hot shoes include Belleville washers, an Inconel 800HT rotational insert assembly, and high density fire temperature insulation.

Want to learn more about pre-insulated supports? View a past pre-insulated support webinar!
access-our-webinar-archives

Pre-Insulated Base Supports for a LNG Plant

July 1st, 2009 No comments
Pre-Insulated Base Supports for a LNG Plant

Pre-Insulated Base Supports for a LNG Plant

Pre-Insulated Base Supports for a LNG Plant

Front View

These low-temperature base supports are fabricated from carbon steel with a hot dipped galvanize finish and range from 23″ to 37″ in height. The supports are 18″ in diameter with a base plate of 20″W x 20″L x 1″H and are designed to support pipes ranging in size from 24″ to 30″. The base supports are fabricated with micarta insulation and will be utilized in a LNG plant as a base beneath a cold temperature pipe.

Do you require pre-insulated supports for your project? Get a quote today!
request-a-quote


Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy